OpenTorque Actuator: Difference between revisions
Jump to navigation
Jump to search
(Added some more links under the "Internal Links" section) |
(Added some more information) |
||
| Line 2: | Line 2: | ||
*An Open Source Rotary Actuator developed by [[Gabrael Levine]] | *An Open Source Rotary Actuator developed by [[Gabrael Levine]] | ||
*Uses a [[BLDC]] , 3D Printed Parts, and some other parts like bearings etc | *Uses a [[BLDC]] , 3D Printed Parts, and some other parts like bearings etc | ||
=Potential Future Modificiations= | |||
*Modify the plastic parts/gears via better plastics ( [[Polycarbonate]] vs [[Nylon]] vs [[ABS]] etc), or replace them with metal perhaps (need to see added weight vs strength and all that. | |||
*Make an integrated [[ODrive]] pcb (adapt the Odrive to a ring/circular plate, not a rectangle, most likely after development of odrive first) | |||
*See the off the shelf options reviewed by [[Skyentific]] , and [https://youtu.be/Mhxz2Bj2RXA This full dissasembly of one of them] | |||
=Internal Links= | =Internal Links= | ||
Latest revision as of 00:06, 19 October 2020
Basics
- An Open Source Rotary Actuator developed by Gabrael Levine
- Uses a BLDC , 3D Printed Parts, and some other parts like bearings etc
Potential Future Modificiations
- Modify the plastic parts/gears via better plastics ( Polycarbonate vs Nylon vs ABS etc), or replace them with metal perhaps (need to see added weight vs strength and all that.
- Make an integrated ODrive pcb (adapt the Odrive to a ring/circular plate, not a rectangle, most likely after development of odrive first)
- See the off the shelf options reviewed by Skyentific , and This full dissasembly of one of them