Latest revision as of 22:17, 2 December 2020

Basics

OSE's Work on a Device for converting Plastic Pellets and/or Plastic Flakes into FDM 3D Printer Filament
As of now most work is occuring on Lyman Filament Extruder, but this will turn into a more ose optimized version as it forks more and more from the original lyman

We go from Tech tree of choices -> Industry Standards -> Technology Assessment -> Value Proposition

@@ Line 1: / Line 1: @@
 =Basics=
 *OSE's Work on a Device for converting [[Plastic Pellets]] and/or [[Plastic Flakes]] into FDM 3D Printer Filament
-*As of now most work is occuring on [[[[Lyman Filament Extruder]], but this will turn into a more ose optimized version as it forks more and more from the original lyman
+*As of now most work is occuring on [[Lyman Filament Extruder]], but this will turn into a more ose optimized version as it forks more and more from the original lyman
 =Requirements=
@@ Line 21: / Line 21: @@
 =Useful Links=
 *
-I would say as of now - it is not quite ready for prime time -- we have had trouble of one kind or another with all of the kickstarter versions -- one more should be on the way to me for testing. Our own device I think is still overbuilt and needs another iteration before I would think about workshops - -particularly as I am not happy with the cross cut shredder as a final solution - it is not open source and it wears out on heavy use. The other group that is pretty far along is [[Protoprint]] -- I just talked to them - and they hope to finish their final design and open source the plans this summer -- that might be the best bet because they have a shredder too. All of the kickstarters are essentially only good for pellets.