Open Source Dessicant-Humidifier Cycle Based Liquid Chiller: Difference between revisions
Jump to navigation
Jump to search
(Added some more information) |
(Added some more information) |
||
| Line 15: | Line 15: | ||
=BOM= | =BOM= | ||
==Column Packing== | |||
*Should be simpler than a [[Spray Tower]] system due to it's "open" nature (even if in a sealed+clean container, it doesn't have a sealed pressurized liquid tube) | |||
*[[Bioballs]] would work and are inexpensive | |||
*[[Stainless Steel Scrubbers]] based packing would work as well (would a conductive packing offer any advantages over thermally insulative plastic? ) | |||
==PVC Pipe== | ==PVC Pipe== | ||
*What diameter should be used? | *What diameter should be used? | ||
Revision as of 00:32, 31 January 2021
Baics
- OSE's Design for a Dessicant-Humidifier Cycle Refrigeration based Hydronic Cooling system
Existing Open Source Designs
Minimum Viable Product
Basic Design
Part A
Part/Componet B
BOM
Column Packing
- Should be simpler than a Spray Tower system due to it's "open" nature (even if in a sealed+clean container, it doesn't have a sealed pressurized liquid tube)
- Bioballs would work and are inexpensive
- Stainless Steel Scrubbers based packing would work as well (would a conductive packing offer any advantages over thermally insulative plastic? )
PVC Pipe
- What diameter should be used?
CAD
Code
Software
Firmware
Internal Links
- [Dessicant-Humidifier Cycle Refrigeration]]
- Hydronic Cooling