Latest revision as of 17:27, 27 June 2021

Notes

Cleaned up stl file. I closed the gaps that gave bad layer adhesion during prints.
If printing with 1.2 mm nozzle, use shell thickkness of 0.9 mm to get the fully enclosed hole near the edge.

If you use 1.2 wall thickness, you get this- note broken hole towards bottom of picture:

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Dimensions	User	Comment
current	17:27, 27 June 2021	(275 KB)	Marcin (talk \| contribs)	2 bunched together for printing on 6" platform
	11:59, 29 January 2020	(138 KB)	Michel (talk \| contribs)	Cleaned up stl file. I closed the gaps that gave bad layer adhesion during prints.

You cannot overwrite this file.

The following 5 pages use this file:

@@ Line 4: / Line 4: @@
 *If printing with 1.2 mm nozzle, use shell thickkness of 0.9 mm to get the fully enclosed hole near the edge.
-[[File:09wall.png|200px|0.9 wall thickness]]
+[[File:09wall.png|200px|0.9 mm wall thickness]]
+If you use 1.2 wall thickness, you get this- note broken hole towards bottom of picture:
+[[File:12wall.png|200px|1.2 mm wall thickness]]