File:ExtrCoolSensPlt.stl: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
(Marcin uploaded a new version of File:ExtrCoolSensPlt.stl)
 
(No difference)

Latest revision as of 17:27, 27 June 2021

Notes

  • Cleaned up stl file. I closed the gaps that gave bad layer adhesion during prints.
  • If printing with 1.2 mm nozzle, use shell thickkness of 0.9 mm to get the fully enclosed hole near the edge.

0.9 mm wall thickness

If you use 1.2 wall thickness, you get this- note broken hole towards bottom of picture:

1.2 mm wall thickness

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeDimensionsUserComment
current17:27, 27 June 2021 (275 KB)Marcin (talk | contribs)2 bunched together for printing on 6" platform
11:59, 29 January 2020 (138 KB)Michel (talk | contribs)Cleaned up stl file. I closed the gaps that gave bad layer adhesion during prints.

You cannot overwrite this file.

Retrieved from "https://wiki.opensourceecology.org/index.php?title=File:ExtrCoolSensPlt.stl&oldid=255830"