CEB Press v21.06 CAM Files: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
(Created page with "*CNC cutting by Seaman and Schuske in St. Joseph *Brian Neal had issues with 5 files from the 1/2" steel in the set, they were scaled up 25.4x on his end. *Here they are scale...")
 
No edit summary
Line 2: Line 2:
*Brian Neal had issues with 5 files from the 1/2" steel in the set, they were scaled up 25.4x on his end.
*Brian Neal had issues with 5 files from the 1/2" steel in the set, they were scaled up 25.4x on his end.
*Here they are scaled down 25.4x. [[File:5 scaled half inch steel.zip]]
*Here they are scaled down 25.4x. [[File:5 scaled half inch steel.zip]]
=CAM=
Note that local cutter, Seaman and Schuske, likes to have individual file parts.
Verification:
<html> <iframe src="https://docs.google.com/presentation/d/e/2PACX-1vTxNfDpWlcowNG_jXo7ItT9LAk2otMUhXatuWb00FVsOPXfDxD6QTjwDtb4Mjmc7y0JalItpyOfn22D/embed?start=false&loop=false&delayms=3000" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe> </html>
[https://docs.google.com/presentation/d/1jCfTRshCzBx_WteHGsLP4q4wqixKOtxjIdvXQ1vc7yk/edit#slide=id.gb328b2d63d_0_9 edit]
1/8" and 1/4" were ok, gave up on the 1/2" verification, and istead sent the individual files and their number:
#1-1.dxf - quantity of 2
#1-3.dxf - quantity of 4
#1-7.dxf - quantity of 2
#1-9.dxf - quantity of 1
#1-10.dxf - quantity of 8
#1-18.dxf - quantity of 2
#1-20.dxf - quantity of 1
#1-21.dxf - quantity of 2
#1-23.dxf - quantity of 2
#1-25.dxf - quantity of 1
#1-26.dxf - quantity of 4
#1-30.dxf - quantity of 2
#1-32.dxf - quantity of 2
#1-34.dxf - quantity of 2
#1-36.dxf - quantity of 2
#1-38.dxf - quantity of 6
#1-44.dxf - quantity of 2
#1-46.dxf - quantity of 4
#1-50.dxf - quantity of 6
#2-1.dxf - quantity of 2
#2-3.dxf - quantity of 2
#2-5.dxf - quantity of 2
#2-7.dxf - quantity of 1
#2-8.dxf - quantity of 1
#2-9.dxf - quantity of 2
#2-11.dxf - quantity of 4
#2-15.dxf - quantity of 3
#2-18.dxf - quantity of 2
#2-20.dxf - quantity of 1
#2-21.dxf - quantity of 1
#2-22.dxf - quantity of 1
==Updated CNC Cut Files==
*Master CAM File - '''[[File:CEB_v1708_CAM.zip]]'''.
:*There are pieces cut from eighth inch steel, quarter inch steel, and half inch steel - marked accordingly
:*Broken line in 1/8" material is a bend line, which means it should also be cut.
:*Numbers in brackets refer to the quantities
:*Nesting in CAM file is on a 4'x8' sheet of steel - as a reference on the absolute size of the parts.
*Some of the individual files are [[File:CEB_DXFs.zip]] - but a lot of them failed to import into [[LibreCAD]].
*Steel order from Seaman and Schuske for only the 1/2" steel plate - nested onto 5x10 foot steel- [[File:seamanandschuske.zip]]

Revision as of 18:03, 28 June 2021

  • CNC cutting by Seaman and Schuske in St. Joseph
  • Brian Neal had issues with 5 files from the 1/2" steel in the set, they were scaled up 25.4x on his end.
  • Here they are scaled down 25.4x. File:5 scaled half inch steel.zip

CAM

Note that local cutter, Seaman and Schuske, likes to have individual file parts.

Verification:

edit

1/8" and 1/4" were ok, gave up on the 1/2" verification, and istead sent the individual files and their number:

  1. 1-1.dxf - quantity of 2
  2. 1-3.dxf - quantity of 4
  3. 1-7.dxf - quantity of 2
  4. 1-9.dxf - quantity of 1
  5. 1-10.dxf - quantity of 8
  6. 1-18.dxf - quantity of 2
  7. 1-20.dxf - quantity of 1
  8. 1-21.dxf - quantity of 2
  9. 1-23.dxf - quantity of 2
  10. 1-25.dxf - quantity of 1
  11. 1-26.dxf - quantity of 4
  12. 1-30.dxf - quantity of 2
  13. 1-32.dxf - quantity of 2
  14. 1-34.dxf - quantity of 2
  15. 1-36.dxf - quantity of 2
  16. 1-38.dxf - quantity of 6
  17. 1-44.dxf - quantity of 2
  18. 1-46.dxf - quantity of 4
  19. 1-50.dxf - quantity of 6
  20. 2-1.dxf - quantity of 2
  21. 2-3.dxf - quantity of 2
  22. 2-5.dxf - quantity of 2
  23. 2-7.dxf - quantity of 1
  24. 2-8.dxf - quantity of 1
  25. 2-9.dxf - quantity of 2
  26. 2-11.dxf - quantity of 4
  27. 2-15.dxf - quantity of 3
  28. 2-18.dxf - quantity of 2
  29. 2-20.dxf - quantity of 1
  30. 2-21.dxf - quantity of 1
  31. 2-22.dxf - quantity of 1

Updated CNC Cut Files

  • There are pieces cut from eighth inch steel, quarter inch steel, and half inch steel - marked accordingly
  • Broken line in 1/8" material is a bend line, which means it should also be cut.
  • Numbers in brackets refer to the quantities
  • Nesting in CAM file is on a 4'x8' sheet of steel - as a reference on the absolute size of the parts.
Retrieved from "https://wiki.opensourceecology.org/index.php?title=CEB_Press_v21.06_CAM_Files&oldid=255958"