Revision as of 22:55, 23 July 2021

Notes

Note everything here ends up at ~~top plate~~ - 2nd level floor added to allow stairway calculation and positioning - see Stairs
The interior bathroom door and laundry wall are taller than 9' because they reach to the underside of the second story subfloor, or almost 10'. Maybe finish below the joists, and connect to joists?

Landing, stairs, and interior walls were originally designed with z = 0 (top of sill) so were 1.5" above the slab. Moved landing down 1.5" and re-calculated the stairs. For the walls, increased the stud length to 107.625" (3 inches longer than standard pre-cut 9' studs) to add both the extra 1.5" at the bottom and eliminate the need for a double top plate to reach the joists.

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Dimensions	User	Comment
current	01:43, 9 August 2021	(911 KB)	Marcin (talk \| contribs)	Added carport
	02:33, 7 August 2021	(862 KB)	Coderjeff (talk \| contribs)	merge Laundry
	21:22, 24 July 2021	(843 KB)	Coderjeff (talk \| contribs)	revised 56, 57, 58, 59
	20:53, 24 July 2021	(840 KB)	Coderjeff (talk \| contribs)	revised 48, 49, 50, 52
	00:38, 24 July 2021	(840 KB)	Coderjeff (talk \| contribs)	revised stairs
	22:55, 23 July 2021	(811 KB)	Coderjeff (talk \| contribs)	Add joist blocking to support top of interior wall 52
	22:25, 23 July 2021	(807 KB)	Coderjeff (talk \| contribs)	re-merge module 51
	21:29, 23 July 2021	(807 KB)	Coderjeff (talk \| contribs)	Add 3" to module 50
	21:11, 23 July 2021	(807 KB)	Coderjeff (talk \| contribs)	add 3" to Modules 48, 49 & 52 - remove 2nd top plate on interior wall
	20:01, 23 July 2021	(811 KB)	Coderjeff (talk \| contribs)	add 3" to Modules 56-59

You cannot overwrite this file.

The following 2 pages use this file: