Large 3D Printers: Difference between revisions
Jump to navigation
Jump to search
(Created page with "When printing on large 3D printers, thermal effects become more pronounced. Here is a study of issues for printing large objects successfully. =Papers= *Deformation with PLA...") |
(→Cost) |
||
| (7 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
=Intro= | |||
When printing on large 3D printers, thermal effects become more pronounced. Here is a study of issues for printing large objects successfully. | When printing on large 3D printers, thermal effects become more pronounced. Here is a study of issues for printing large objects successfully. | ||
=Analysis of Industry Standards= | |||
#Airwolf Axiom 20 $10K - [https://airwolf3d.com/2018/03/27/3d-print-large-parts/] | |||
##150C max temperature (lower than 178C continuous temp for OSE) | |||
##12 by 12 by 20" | |||
##Internal heated chamber has 3 heat sources - Tri-heat | |||
##internal chamber dries filament in 20 minutes | |||
##Uses bed adhesive (consumable). Not state of art. | |||
=Papers= | =Papers= | ||
*Deformation with PLA - [https://www.academia.edu/37894633/Improved_Model_and_Experimental_Validation_of_Deformation_in_Fused_Filament_Fabrication_of_Poly_Lactic_Acid] | *Deformation with PLA - [https://www.academia.edu/37894633/Improved_Model_and_Experimental_Validation_of_Deformation_in_Fused_Filament_Fabrication_of_Poly_Lactic_Acid] | ||
*Study of printing skateboards with Gigabot X - [https://www.academia.edu/38728877/Fab_Lab_Applications_of_Large-Area_Waste_Polymer-based_Additive_Manufacturing] | |||
=Cost= | |||
*Gigabot Exabot - 762mm x 762mm x 1,829mm = 37.5 cu ft [https://shop.re3d.org/collections/gigabot-3d/products/exabot]. Compared to OSE 4x4x8' printer - 128 cu ft. 3.4x larger. | |||
*Gigabot - $9k for kit, $13k for machine - [https://shop.re3d.org/collections/gigabot-3d] | |||
=See Also= | |||
*[[Largest FDM 3D Printers]] | |||
=Links= | |||
#Axiom latge 3D printer with enclosure - only 12x12x20, $10k [https://airwolf3d.com/shop/tall-desktop-3d-printer/] | |||
Latest revision as of 00:47, 8 August 2021
Intro
When printing on large 3D printers, thermal effects become more pronounced. Here is a study of issues for printing large objects successfully.
Analysis of Industry Standards
- Airwolf Axiom 20 $10K - [1]
- 150C max temperature (lower than 178C continuous temp for OSE)
- 12 by 12 by 20"
- Internal heated chamber has 3 heat sources - Tri-heat
- internal chamber dries filament in 20 minutes
- Uses bed adhesive (consumable). Not state of art.
Papers
Cost
- Gigabot Exabot - 762mm x 762mm x 1,829mm = 37.5 cu ft [4]. Compared to OSE 4x4x8' printer - 128 cu ft. 3.4x larger.
- Gigabot - $9k for kit, $13k for machine - [5]
See Also
Links
- Axiom latge 3D printer with enclosure - only 12x12x20, $10k [6]