Large 3D Printers: Difference between revisions
Jump to navigation
Jump to search
(→Intro) |
(→Cost) |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 4: | Line 4: | ||
=Analysis of Industry Standards= | =Analysis of Industry Standards= | ||
#Airwolf Axiom 20 - [https://airwolf3d.com/2018/03/27/3d-print-large-parts/] | #Airwolf Axiom 20 $10K - [https://airwolf3d.com/2018/03/27/3d-print-large-parts/] | ||
##150C max temperature (lower than 178C continuous temp for OSE) | ##150C max temperature (lower than 178C continuous temp for OSE) | ||
##12 by 12 by 20" | ##12 by 12 by 20" | ||
| Line 16: | Line 16: | ||
=Cost= | =Cost= | ||
*Gigabot Exabot - 762mm x 762mm x 1,829mm = 37.5 cu ft [https://shop.re3d.org/collections/gigabot-3d/products/exabot]. Compared to OSE 4x4x8' printer - 128 cu ft. 3.4x larger. | |||
*Gigabot - $9k for kit, $13k for machine - [https://shop.re3d.org/collections/gigabot-3d] | *Gigabot - $9k for kit, $13k for machine - [https://shop.re3d.org/collections/gigabot-3d] | ||
Latest revision as of 00:47, 8 August 2021
Intro
When printing on large 3D printers, thermal effects become more pronounced. Here is a study of issues for printing large objects successfully.
Analysis of Industry Standards
- Airwolf Axiom 20 $10K - [1]
- 150C max temperature (lower than 178C continuous temp for OSE)
- 12 by 12 by 20"
- Internal heated chamber has 3 heat sources - Tri-heat
- internal chamber dries filament in 20 minutes
- Uses bed adhesive (consumable). Not state of art.
Papers
Cost
- Gigabot Exabot - 762mm x 762mm x 1,829mm = 37.5 cu ft [4]. Compared to OSE 4x4x8' printer - 128 cu ft. 3.4x larger.
- Gigabot - $9k for kit, $13k for machine - [5]
See Also
Links
- Axiom latge 3D printer with enclosure - only 12x12x20, $10k [6]