Revision as of 16:57, 12 October 2021

Part Library

CNC Torch Table Belt Pinch. - FreeCAD -File:CNC Torch Belt Pinch.stl.
CNC Torch Table Carriage. - FreeCAD -File:CNC Torch Table Carriage.fcstd. File:Carriage1.stl. Latest update on Gitlab - [1]
CNC Torch Table Idler. - FreeCAD -File:CNC Torch Table idler2.FCStd - stl - File:CNC Torch Table Idler5.stl. Updated 10/1/21 idler on Gitlab - [2]
File:Nema23motor.fcstdNema 23 motor.
File:Bearing 1in.fcstd
Gitlab Source. STL file - File:Motorpiece1in.stl

Cable Chain - . File:Cablechainlarge.fcstd. File:Cablechainlarge.stl. File:Cablechainlarge.gcode.zip.
Bed Hold - . File:Bedhold.fcstd. File:Bedhold.stl - note - needs update for extra chamfer. Use latest FreeCAD file.
Rod Test File with bushing - File:1inchrodtest.fcstd. With bushing it is 1.25". Add 0.1" to make it 1.35" diameter. STL - File:1inchrodtest.stl
Rod Test File without bushing - File:1inchrodtestnobushing.fcstd. General rule: add 0.1" to diameter for 1.2mm nozzles. D=1.1"
Rod spacing template - 1/8" by 3.5" full hole - File:Spacingtemplate.fcstd
Test file for outside holes - File:Outsideholes.fcstd
Bushing template - File:1inchbushingtest.fcstd

@@ Line 8: / Line 8: @@
 File:Belt Pinch.png|''' CNC Torch Table Belt Pinch.''' - FreeCAD -[[File:CNC Torch Belt Pinch.stl]].
-File:CNC Carriage CAD pic.png|'''CNC Torch Table Carriage.''' - FreeCAD -[[File:CNC_Torch_Table_Carriage.fcstd]]. [[File:carriage1.stl]]. Latest update on Gitlab - []
+File:CNC Carriage CAD pic.png|'''CNC Torch Table Carriage.''' - FreeCAD -[[File:CNC_Torch_Table_Carriage.fcstd]]. [[File:carriage1.stl]]. Latest update on Gitlab - [https://gitlab.com/marcin_ose/1-inch-universal-axis/-/blob/main/CNC_Torch_Table_Carriage.fcstd]
 File:CNC Torch Table Ider.png|'''CNC Torch Table Idler.''' - FreeCAD -[[File:CNC_Torch_Table_idler2.FCStd]] - stl - [[File:CNC Torch Table Idler5.stl]]. Updated 10/1/21 idler on Gitlab - [https://gitlab.com/marcin_ose/1-inch-universal-axis/-/blob/main/idler_mod.fcstd]