Revision as of 03:18, 16 October 2021

Working Doc

CNC Torch Table Belt Pinch. - FreeCAD -File:CNC Torch Belt Pinch.stl.
CNC Torch Table Carriage. - FreeCAD -File:CNC Torch Table Carriage.fcstd. File:Carriage1.stl. Latest update on Gitlab - [1]
CNC Torch Table Idler. - FreeCAD -File:CNC Torch Table idler2.FCStd - stl - File:CNC Torch Table Idler5.stl. Updated 10/1/21 idler on Gitlab - [2]
File:Nema23motor.fcstdNema 23 motor.
File:Bearing 1in.fcstd
Gitlab Source. Newer version is in FreeCAD - File:Newquickmotor.fcstd. STL file - File:Motorpiece1in.stl. New gcode at gitlab - [3]
Separate carriage piece. File:Carriageseparate.fcstd.
Motor to idler converter plug. File:Motortoidler.fcstd. For printing - File:Motortoidler.stl
New 1" idler assembly. File:Newidler1nch.fcstd.

Cable Chain - . File:Cablechainlarge.fcstd. File:Cablechainlarge.stl. File:Cablechainlarge.gcode.zip.
Bed Hold - . File:Bedhold.fcstd. File:Bedhold.stl - note - needs update for extra chamfer. Use latest FreeCAD file.
Rod Test File with bushing - File:1inchrodtest.fcstd. With bushing it is 1.25". Add 0.1" to make it 1.35" diameter. STL - File:1inchrodtest.stl
Rod Test File without bushing - File:1inchrodtestnobushing.fcstd. General rule: add 0.1" to diameter for 1.2mm nozzles. D=1.1"
Rod spacing template - 1/8" by 3.5" full hole - File:Spacingtemplate.fcstd
Test file for outside holes - File:Outsideholes.fcstd
Bushing template - File:1inchbushingtest.fcstd

@@ Line 22: / Line 22: @@
 File:carriageseparate.png|Separate carriage piece. [[File:carriageseparate.fcstd]].
-File:idlerconverter.png|Motor to idler converter plug. [[File:motortoidler.fcstd]].
+File:idlerconverter.png|Motor to idler converter plug. [[File:motortoidler.fcstd]]. For printing - [[File:motortoidler.stl]]
 File:newidler.png|New 1" idler assembly. [[File:newidler1nch.fcstd]].