Revision as of 20:25, 20 October 2021

Working Doc

File:Carriageassy.fcstd Carriage assembly.
File:Torch tip.fcstd Torch Handle.
File:Torch handle only.fcstd Torch Handle.
Igniter for acetylene cut torch
FreeCAD - File:Igniter.fcstd
EM valve for acetylene and oxygen
FreeCAD - File:Fl 205 cut of solenoid.fcstd
CNCtorchfinalassy.png

CNC Torch Final Assembly. File:Cnctorchfinalassembly.fcstd.
CNC Torch Frame. File:Cnctorchframe.fcstd.
Gitlab Source. Newer version is in FreeCAD - File:Newquickmotor.fcstd. STL file - File:Motorpiece1in.stl. New gcode at gitlab - [1]
Separate carriage piece. File:Carriageseparate.fcstd.
Motor to Idler Converter Plug. File:Motortoidler.fcstd. For printing - File:Motortoidler.stl
New 1" idler assembly. File:Newidler1nch.fcstd. Note that the idler is made by taking the motor piece and adding an insert to create the idler function. Thus, the 3D printed piece is the same as the motor piece - plus an insert (the Motor to Idler Converter Plug. 2 bearings go in as well, on an 8 mm shaft.
608 skateboard 8x22x7 mm Bearing. Download - File:608Bearing.FCStd
Torch head assembly. FreeCAD file on Gitlab - [2]
CNC Torch Table Belt Pinch. - FreeCAD -File:CNC Torch Belt Pinch.stl.
CNC Torch Table Carriage. - FreeCAD -File:CNC Torch Table Carriage.fcstd. File:Carriage1.stl. Latest update on Gitlab - [3]
CNC Torch Table Idler. - FreeCAD -File:CNC Torch Table idler2.FCStd - stl - File:CNC Torch Table Idler5.stl. Updated 10/1/21 idler on Gitlab - [4]
File:Nema23motor.fcstdNema 23 motor.
File:Bearing 1in.fcstd

Cable Chain - . File:Cablechainlarge.fcstd. File:Cablechainlarge.stl. File:Cablechainlarge.gcode.zip.
Bed Hold - . File:Bedhold.fcstd. File:Bedhold.stl - note - needs update for extra chamfer. Use latest FreeCAD file.
Rod Test File with bushing - File:1inchrodtest.fcstd. With bushing it is 1.25". Add 0.1" to make it 1.35" diameter. STL - File:1inchrodtest.stl
Rod Test File without bushing - File:1inchrodtestnobushing.fcstd. General rule: add 0.1" to diameter for 1.2mm nozzles. D=1.1"
Rod spacing template - 1/8" by 3.5" full hole - File:Spacingtemplate.fcstd
Test file for outside holes - File:Outsideholes.fcstd
Bushing template - File:1inchbushingtest.fcstd

@@ Line 7: / Line 7: @@
 <gallery perrow=6>
+File:carriageassy.png|[[File:carriageassy.fcstd]] Carriage assembly.
 File:torch_tip.png|[[File:torch_tip.fcstd]] Torch Handle.