Trellis Procedure Notes: Difference between revisions
Jump to navigation
Jump to search
(Created page with "*install first trellis. Use successive overlap. Trellis had 15 inch cuts, for 18" width total. *Lag bolts every 1 foot. Started with 4-6 3" deck screws, right at top z flashing.") |
No edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
*install first trellis. Use successive overlap. Trellis had 15 inch cuts, for 18" width total. | *install first trellis. Use successive overlap. Trellis had 15 inch cuts, for 18" width total. | ||
*Lag bolts every 1 foot. Started with 4-6 3" deck screws, right at top z flashing. | *Lag bolts every 1 foot. Started with 4-6 3" deck screws, right at top z flashing. | ||
*First trellis started in northeast side. Put band on. But then band needed to be moved east due to successive overlap. | |||
*Used triangle supports. | |||
*Used blocking to support band 1.5" lower, but some places band was even with trellis. | |||
*Used blocking on leading end of trellis as support and alignment for next trellis, to save on using triangle supports. Built 4 triangle supports sufficient for one side of house | |||
*Screw in 5" 3/8" lag bolts from angle - so length of driving cordless drill fits in. | |||
*Boots should really be 4" (here 1.5" house + siding 5/8" +1.5 trellis+ washer). Total 96 bolts. | |||
*Screws thus should likewise be 4" | |||
Latest revision as of 12:21, 23 December 2021
- install first trellis. Use successive overlap. Trellis had 15 inch cuts, for 18" width total.
- Lag bolts every 1 foot. Started with 4-6 3" deck screws, right at top z flashing.
- First trellis started in northeast side. Put band on. But then band needed to be moved east due to successive overlap.
- Used triangle supports.
- Used blocking to support band 1.5" lower, but some places band was even with trellis.
- Used blocking on leading end of trellis as support and alignment for next trellis, to save on using triangle supports. Built 4 triangle supports sufficient for one side of house
- Screw in 5" 3/8" lag bolts from angle - so length of driving cordless drill fits in.
- Boots should really be 4" (here 1.5" house + siding 5/8" +1.5 trellis+ washer). Total 96 bolts.
- Screws thus should likewise be 4"