Inspection Schedule: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
(Created page with "The rough inspection should be performed before the insulation is installed. This is not stated as a requirement, but a suggestion here. [https://www.bartowcountyga.gov/Typica...")
 
 
(17 intermediate revisions by the same user not shown)
Line 1: Line 1:
The rough inspection should be performed before the insulation is installed. This is not stated as a requirement, but a suggestion here. [https://www.bartowcountyga.gov/Typical%20Order%20of%20Inspections_06-17-16.pdf]
=Sequence=
*The rough inspection should be performed before the insulation is installed. This is not stated as a requirement, but a suggestion here. [https://www.bartowcountyga.gov/Typical%20Order%20of%20Inspections_06-17-16.pdf]
*Rough-in inspection can also occur after insulation is in, but it may be more difficult to perform inspection. [https://inspectusa.com/blog/pre-drywall-inspection-and-scheduling-inspection/#:~:text=A%20Pre%2Ddrywall%20inspection%20should,IN%E2%80%9D%20portion%20of%20the%20project.&text=When%20everything%20is%20100%25%20completed,signed%20off%2C%20ready%20for%20insulation.]
*Thus - is there a separate inspection for insulation prior to all sheathing?
=OSE Case=
*No insulation covers any wiring or plumbing work.
*Air test of water supply - leave a test port in water supply for air pressure testing or water pressure testing.
*Smoke detectors are required on the electrical side - [https://www.cityofeasley.com/Rough-In%20Inspection%20Checklist.pdf]
 
=Extreme Inspection Schedules=
Some locations may have a large number of inspections, ideally these can occur on the same day if there are multiple similar ones. See [https://www2.minneapolismn.gov/media/content-assets/www2-documents/business/wcmsp-204538.pdf]. This calls for:
#Excavation
#Foundation
#Underground plumbing
#Rough plumbing/electrical
#Framing
#Insulation/vapor barrier - 2 inspections if foundation has exterior insulation
#Final plumbing/mechanical
#Final inspection. All done, street number and landscaping done.
 
=Links=
*[[Foundation Inspection]]
*[[Plumbing Inspection]] - foundation, rough-in, final
**[[Foundation Plumbing Inspection]]
**[[Rough-In Plumbing Inspection]]
**[[Final Plumbing Inspection]]
*[[Electrical Inspection]]
*[[KC Inspections]]
*[[Feedback_on_Inspection_Schedule]]
*[[Rough-In Electrical Inspection]]
*{{check}}'''[[Under Construction Phase Inspections]]'''
*{{check}}'''[[Seed Eco-Home Inspection Planning]]'''

Latest revision as of 00:13, 16 October 2022

Sequence

  • The rough inspection should be performed before the insulation is installed. This is not stated as a requirement, but a suggestion here. [1]
  • Rough-in inspection can also occur after insulation is in, but it may be more difficult to perform inspection. [2]
  • Thus - is there a separate inspection for insulation prior to all sheathing?

OSE Case

  • No insulation covers any wiring or plumbing work.
  • Air test of water supply - leave a test port in water supply for air pressure testing or water pressure testing.
  • Smoke detectors are required on the electrical side - [3]

Extreme Inspection Schedules

Some locations may have a large number of inspections, ideally these can occur on the same day if there are multiple similar ones. See [4]. This calls for:

  1. Excavation
  2. Foundation
  3. Underground plumbing
  4. Rough plumbing/electrical
  5. Framing
  6. Insulation/vapor barrier - 2 inspections if foundation has exterior insulation
  7. Final plumbing/mechanical
  8. Final inspection. All done, street number and landscaping done.

Links