Revision as of 03:24, 13 November 2022

Basics

This page goes over the basic procedures involved, and areas of concern in the Maintenance of 3D Printers

Checking for Dust in Fans, on Components / the Print Bed
Checking Wires and the Cable Chain for any Damage
Checking all the Fasteners for proper tightness
Checking Belt Tension (if using a Motion System with Belts such as the Universal Axis )
Checking the Bearings / Bushings and either Regreasing/Lubricating Them and/or Replacing Them

Revision as of 03:24, 13 November 2022 (view source) Eric (talk \| contribs) (Added some more links under the "External Links" section) ← Older edit		Revision as of 03:24, 13 November 2022 (view source) Eric (talk \| contribs) m (Labeled the Length of a Linked Video) Newer edit →
Line 13:		Line 13:

	=External Links=		=External Links=
	*[https://www.youtube.com/watch?v=kAafiApJs9A A Video by the YouTube Channel "Teaching Tech" Titled "3D printer essential maintenance guide" ]		*[https://www.youtube.com/watch?v=kAafiApJs9A A Video by the YouTube Channel "Teaching Tech" Titled "3D printer essential maintenance guide" ] ( '''~12 Minute Watch''' )