Revision as of 19:01, 30 November 2023

Structural Nailing, Seed Eco-Home

LP smartside - .113 hot dip galvanized nails, minimum 1.5" penetration into underlying structure. Doesn't distinguish clipped vs full head or ring vs smooth. - [2].
- Options - [3]
Could possibly use stainless 15 ga DA style which is 0.7", so would need to increase the nailing schedule by 50%. Could be a good option given the cost of nails and effectiveness of DCN650B nailer.

Roofing and siding nails are not the same. But does this apply to vinyl siding? [5]

@@ Line 10: / Line 10: @@
 *LP smartside - .113 hot dip galvanized nails, minimum 1.5" penetration into underlying structure. Doesn't distinguish clipped vs full head or ring vs smooth. - [https://hw.menardc.com/main/items/media/LOUIS004/Install_Instruct/LPSmartSideTrimandFasciaapplicationinstructions.pdf].
 **Options - [https://www.menards.com/main/hardware/fasteners-connectors/collated-nails-screws-staples/collated-nails-cleats/c-19718.htm?rid=ufFiAd58Pn&shippingOptions_facet=Pickup+at+Store+Eligible&Spec_Finish_facet=Hot-Dipped+Galvanized&Spec_OverallLength_facet=2-3%2F8+inch&Spec_ProductType_facet=Collated+Framing+Nails&Spec_ShankType_facet=Smooth]
-**2-3/8"
+*Could possibly use stainless 15 ga DA style which is 0.7", so would need to increase the nailing schedule by 50%. Could be a good option given the cost of nails and effectiveness of DCN650B nailer.
 =Interior Trim and Beadboard=