May Production Run: Difference between revisions
Jump to navigation
Jump to search
(Created page with "=Tasks Remaining= ==Wheel Mounting== *Drill 1-3/8" ends of shafts *Drill 3/4" hole for wheel mounting shafts *Cut wheel mounting gussets *CNC Torch Table Wheel Mounting plates (...") |
(No difference)
|
Revision as of 03:24, 25 May 2011
Tasks Remaining
Wheel Mounting
- Drill 1-3/8" ends of shafts
- Drill 3/4" hole for wheel mounting shafts
- Cut wheel mounting gussets
- CNC Torch Table Wheel Mounting plates (12)
- CNC Torch Hydraulic motor plates