Landa MHC

Basics

• A Hot Water Pressure Washer that runs off a Gasoline Engine (A Honda GX390 to be specific) and a Diesel Burner (A Wayne MSR DC-12V Burner )
• Also has a certain degree of Foolproofing features, although once “on the fritz” they can become a bit of a hindrance
• It HAS wheels, but short of going in straight lines/lifting the front wheels to turn it, it isn’t VERY mobile
  • Also the brake stabs INTO THE WHEELS, so not a great design there. Something akin to a ratchet mechanism, but a shape welded onto the axle would be nicer
• Quite loud too, but especially for Mobile Unit, better mufflers/a hush box (re Generator Shed etc) are hard to do
  • A Motorcycle Muffler / Small Engine Muffler (assuming it doesn’t impact engine performance etc) would be nicer however

Quick Reference

Specs

• Pressure (psi) 2400
• Flow rate (gal/min) 2.7

Fuel

• Gasoline (Preferably Ethanol Free Gasoline , although E-10 / E-15 MAY RUN short term, just don’t store it like that)
• Diesel / Off Road Diesel
  • Uncertain on if Home Heating Oil / Kerosene / Marine Diesel Oil etc will run in it

Sourcing

• ~5k USD New

Internal Links

• Hot Water Pressure Washer
  • Propane Hot Water Pressure Washer
    • Short of SLIGHTLY more difficult fuel sourcing, this would eliminate much of the issues with the Gas/Diesel system

External Links

• The Official Landa Page on the MHC Line
• The Operator’s Manual for the Landa MHC
• The Official Data Sheet on the Landa MHC