Build Fuel Tank: Difference between revisions
Jump to navigation
Jump to search
(Created page with "*Cut 1/4"x4"x8*fuel tank with cold cut saw, band saw, or torch *[2] Cut tank ends - 1/4"x4"x8" flats *Spray paint patter of filler cap ontop *Torch filler cap hole *Drill screw ...") |
(No difference)
|
Revision as of 22:20, 18 June 2011
- Cut 1/4"x4"x8*fuel tank with cold cut saw, band saw, or torch
- [2] Cut tank ends - 1/4"x4"x8" flats
- Spray paint patter of filler cap ontop
- Torch filler cap hole
- Drill screw holes for filler cap
- Determine fuel line orientation - with Chris
- Torch hole for fuel line
- Weld fuel hole bung
- Weld bottom and top onto fuel tank