Mount Cylinders: Difference between revisions
Jump to navigation
Jump to search
(Created page with "*Drill cylinder mount plate holes in loader arms *Mount cylinder plates (2 per arm) *With loader arms in place, arrange bottom and top mounts, drill holes *Attach main cylinder t...") |
No edit summary |
||
| Line 1: | Line 1: | ||
*[1] Cut 1/2"X6"x12" plate | |||
*[2] Cut 1/2"x4"x6" plate | |||
*Mag drill or punch [4] 3/4" holes in 6"x12: plate | |||
*Mag drill or punch [2] 1" pin holes on each 4"x6" plate | |||
*Weld 1" drilled out nut onto 4"x6" plates | |||
*Tack [2] plates about 3.5" apart for cylinder mounting | |||
*Weld assembly together with cylinder pin in place (prevents shifting) | |||
*Lay assembly in place on frame, and pin bottom of main cylinder into it | |||
*Pin top of main cylinder into the arm attachment plates | |||
*Pin bottom of secondary cylinder to the arm attachment plates | |||
*Pin top of secondary cylinder to the QA Plate mounts | |||
[[Category:Fabrication Procedures]] | |||
*Drill cylinder mount plate holes in loader arms | *Drill cylinder mount plate holes in loader arms | ||
*Mount cylinder plates (2 per arm) | *Mount cylinder plates (2 per arm) | ||
Revision as of 01:41, 19 June 2011
- [1] Cut 1/2"X6"x12" plate
- [2] Cut 1/2"x4"x6" plate
- Mag drill or punch [4] 3/4" holes in 6"x12: plate
- Mag drill or punch [2] 1" pin holes on each 4"x6" plate
- Weld 1" drilled out nut onto 4"x6" plates
- Tack [2] plates about 3.5" apart for cylinder mounting
- Weld assembly together with cylinder pin in place (prevents shifting)
- Lay assembly in place on frame, and pin bottom of main cylinder into it
- Pin top of main cylinder into the arm attachment plates
- Pin bottom of secondary cylinder to the arm attachment plates
- Pin top of secondary cylinder to the QA Plate mounts
- Drill cylinder mount plate holes in loader arms
- Mount cylinder plates (2 per arm)
- With loader arms in place, arrange bottom and top mounts, drill holes
- Attach main cylinder to arms
- With main cylinder attached, finetune location of bottom cylinder mount for equal extension of cylinders
- Drill bottom mount locations
- Bolt bottom mounts