Propane Storage Architecture: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
(Added some more links under the “External Links” section)
(Added some more links under the “External Links” section)
Line 46: Line 46:
*[https://youtu.be/lWH-tG1FRT4?si=rhNx6-cbEU4f-AGn
*[https://youtu.be/lWH-tG1FRT4?si=rhNx6-cbEU4f-AGn
**A showcase of “gas growler” type tanks / ones SLIGHTLY above a 20lb tank
**A showcase of “gas growler” type tanks / ones SLIGHTLY above a 20lb tank
*[https://youtu.be/l-apxDFLdeU?si=go_AUD7uSYMvAqyP A Video by the YouTube Channel “CheapRVliving” Titled “Different Size Propane Bottles and How to Use Them!” ] ( ‘’’~12 Minute Watch’’’ )

Revision as of 03:11, 12 January 2026

Basics

  • This page aims to lay out a semi-standardized Architecture for storing and using Propane using largely COTS equipment

Largest

Smaller

Niche

Misc Adapters

  • Two Stage Propane Regulators
    • Supposedly Better
  • 20lb Fitting->1LB Fitting (and vice versa)
  • Flame King Brand AND Mr Heater Brand Fill Adapters
    • Both work roughly the same, but due to a notch are not intercompatible
  • Ignik TapRack
    • Uncertain how much of a gimmick it is, but refills 4x 1LB Bottles at once from a hose
    • Can it be used with Flame King and/or Mr Heater Brand Tanks is the question?

Internal Links

External Links