Steam Engine Build/Exhaust Plenum: Difference between revisions
No edit summary |
No edit summary |
||
| (One intermediate revision by the same user not shown) | |||
| Line 5: | Line 5: | ||
The exhaust plenum forms a chamber on the outside of the cylinder that channels exhausted steam from the exhaust vents in the cylinder liner and case to a single exit point. This allows exhausted steam to be collected for secondary uses, such as heating. The exhaust plenum is an optional steam engine part. If left off, steam will vent to the atmosphere through the four exhaust vents in the cylinder. | The exhaust plenum forms a chamber on the outside of the cylinder that channels exhausted steam from the exhaust vents in the cylinder liner and case to a single exit point. This allows exhausted steam to be collected for secondary uses, such as heating. The exhaust plenum is an optional steam engine part. If left off, steam will vent to the atmosphere through the four exhaust vents in the cylinder. | ||
=CAD= | |||
'''Exhaust Plenum Element'''<br> | |||
[[Image:cad-exhaust-plenum-1.png]][[Image:cad-exhaust-plenum-2.png]] | |||
'''Exhaust Plenum Assembly'''<br> | |||
[[Image:cad-exhaust-asmbly.png]] | |||
=Drawing= | =Drawing= | ||
Latest revision as of 01:51, 26 June 2011
Main > Energy > Steam Engine
Steam Engine Build Instructions
Description
The exhaust plenum forms a chamber on the outside of the cylinder that channels exhausted steam from the exhaust vents in the cylinder liner and case to a single exit point. This allows exhausted steam to be collected for secondary uses, such as heating. The exhaust plenum is an optional steam engine part. If left off, steam will vent to the atmosphere through the four exhaust vents in the cylinder.
CAD
Exhaust Plenum Element
Exhaust Plenum Assembly
Drawing
Instructions
The exhaust plenum consists of four identical semi-circular parts bolted together with four quarter-inch bolts. One part should have a hole drilled into it to allow steam to escape. Later, this will have a fixture to capture spent steam.
Fabrication Tips
- Use a turnable on a milling bed to mill the inside channel.
- The bolt tabs could be welded on after milling the exhaust channel.