The Liberator BOM: Difference between revisions
Jump to navigation
Jump to search
(→Bolts) |
No edit summary |
||
| (5 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
{{Category=CEB press}} | |||
=Main Frame= | =Main Frame= | ||
| Line 8: | Line 9: | ||
*Main cylinder adjustment, front to back: [2] 1/2"x1.5" bolts with nuts | *Main cylinder adjustment, front to back: [2] 1/2"x1.5" bolts with nuts | ||
*Main cylinder adjustments, 3/4"x______________ (can use threaded rod with welded nut: 2 feet of rod, [2] 3/4" nuts | *Main cylinder adjustments, 3/4"x______________ (can use threaded rod with welded nut: 2 feet of rod, [2] 3/4" nuts | ||
*Hopper edge stubs - [12] 1" stubs or 1/2"x1" bolts, [12] washers, [12] nylon | *Hopper edge stubs - [12] 1" stubs or 1/2"x1" bolts, [12] washers, [12] nylon lock nuts. | ||
*Hopper mount plate - [6] 3/4" nuts, 4 washers, [4] 3/4x1.5" bolts | *Hopper mount plate - [6] 3/4" nuts, 4 washers, [4] 3/4x1.5" bolts | ||
*Primary arms: [4] 3/4"x2" bolts, [4] washers, [4] nuts (welded to frame) | *Primary arms: [4] 3/4"x2" bolts, [4] washers, [4] nuts (welded to frame) | ||
*Attachment of secondary arms to primary arms": [6] 3/4"x2" bolts (4 for cylinder attachment side, 2 for other side) with [6] nuts and [6] washers. | *Attachment of secondary arms to primary arms": [6] 3/4"x2" bolts (4 for cylinder attachment side, 2 for other side) with [6] nuts and [6] washers. | ||
*Attachment of all adjustable parts: 3/4"x1.5" bolts: [12] for adjustable legs and feet plus nuts; [2] for rear, vertical hopper supports plus nuts; | *Attachment of all adjustable parts: 3/4"x1.5" bolts: [12] for adjustable legs and feet plus nuts; [2] for rear, vertical hopper supports plus nuts; | ||
*Roller guides - [2] 1/2"x2" with [2] nylon | *Roller guides - [2] 1/2"x2" with [2] nylon lock nuts | ||
*Roller guide | *Roller guide adjusters - [4] 1/2"x2" bolts with [4] nuts. | ||
* | *8 holes for tables - [8] 1/2"x1/5" bolts, [8] washers, [8] nylon lock nuts | ||
*Front hopper supports - [2] 3/4"x2" bolts, [2] nuts, [2] washers | |||
*Soil sensor - [2] 1/2"x2" with [2] nylon lock nuts and [2] washers (attachment); [1] 1/2"x1" with [1] nut; [1] 1/2x2.5" with [1] washer and [1] nylon locknut for the inside; [1] 1/2"x1.5" with [1] nylon locknut and [1] washer | |||
*Grate mounting: | |||
*Hopper shaker mounting: | |||
*Hopper shaker assembly: [4] 3/8"x2" bolts with [4] lock nuts, [4] lock washers; use keyed shaft for mounting to motor | |||
=Hopper Shaker= | |||
*Keyed shafting - [https://www.surpluscenter.com/item.asp?item=1-2982-100-3&catname=hydraulic] - $34 for 3 feet; need 6.5" | |||
[[Category: | |||
=Controller Electronics= | |||
*[[Molex Connector]]s - | |||
[[Category:BOM]] | |||
[[Category:CEB Press Fabrication]] | |||
Latest revision as of 22:42, 3 July 2011
Main Frame
Bolts
- Frame: [16] grade 8, 1/2"x1.5" bolts, with lock washers and nuts
- Frame: [16] 1/2"x1.5" bolts, with lock washers and nuts
- Main cylinder adjustment, front to back: [2] 1/2"x1.5" bolts with nuts
- Main cylinder adjustments, 3/4"x______________ (can use threaded rod with welded nut: 2 feet of rod, [2] 3/4" nuts
- Hopper edge stubs - [12] 1" stubs or 1/2"x1" bolts, [12] washers, [12] nylon lock nuts.
- Hopper mount plate - [6] 3/4" nuts, 4 washers, [4] 3/4x1.5" bolts
- Primary arms: [4] 3/4"x2" bolts, [4] washers, [4] nuts (welded to frame)
- Attachment of secondary arms to primary arms": [6] 3/4"x2" bolts (4 for cylinder attachment side, 2 for other side) with [6] nuts and [6] washers.
- Attachment of all adjustable parts: 3/4"x1.5" bolts: [12] for adjustable legs and feet plus nuts; [2] for rear, vertical hopper supports plus nuts;
- Roller guides - [2] 1/2"x2" with [2] nylon lock nuts
- Roller guide adjusters - [4] 1/2"x2" bolts with [4] nuts.
- 8 holes for tables - [8] 1/2"x1/5" bolts, [8] washers, [8] nylon lock nuts
- Front hopper supports - [2] 3/4"x2" bolts, [2] nuts, [2] washers
- Soil sensor - [2] 1/2"x2" with [2] nylon lock nuts and [2] washers (attachment); [1] 1/2"x1" with [1] nut; [1] 1/2x2.5" with [1] washer and [1] nylon locknut for the inside; [1] 1/2"x1.5" with [1] nylon locknut and [1] washer
- Grate mounting:
- Hopper shaker mounting:
- Hopper shaker assembly: [4] 3/8"x2" bolts with [4] lock nuts, [4] lock washers; use keyed shaft for mounting to motor
Hopper Shaker
- Keyed shafting - [1] - $34 for 3 feet; need 6.5"