Design for Fabrication: Difference between revisions
Jump to navigation
Jump to search
(Created page with "See an example of the engine mounting plate for the Power Cube. The point is, the mounting plate is a 1/4" plate with some holes. Nothing else. Simple to fabricate with the min...") |
(No difference)
|
Revision as of 05:08, 19 September 2011
See an example of the engine mounting plate for the Power Cube.
The point is, the mounting plate is a 1/4" plate with some holes. Nothing else. Simple to fabricate with the minimum parts.
Compare this to this engine mount plate on another device, which is not so simple:
Note: that may be a bad example, since we are considering different functions, but the fact remains that the latter could be simplified if design-for-fabrication were an objective.