April 2011 Production Run Hydraulics BOM: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
 
(147 intermediate revisions by 2 users not shown)
Line 1: Line 1:
=Hydraulics=
=Generator (X1)=
#'''[1] hydraulic motor for direct 1800RPM generator drive - [https://www.surpluscenter.com/item.asp?catname=&qty=1&item=9-7073-150]'''
#'''[1] 5/8" coupler - [https://www.surpluscenter.com/item.asp?item=1-1563-B&catname=powerTrans]'''


Note that the following list involves 2 loaders. For a simpler version, a single front loader is sufficient. Two loaders are used for extreme flexibility.
=Other (X5)=
#'''[1] Power Cube Throttle Cable - [https://www.surpluscenter.com/item.asp?item=1-2557&catname=engines] - need 5'''
#'''Battery Cable - [https://www.surpluscenter.com/item.asp?item=11-3302&catname=engines] - need 3'''
#'''Starter Solenoid - [https://www.surpluscenter.com/item.asp?item=11-1108&catname=engines] - need 5'''
#'''Key Switch - [https://www.surpluscenter.com/item.asp?item=11-1622&catname=engines] - need 5'''
#'''Fuel Hose Barb - [https://www.surpluscenter.com/item.asp?item=455-AA&catname=engines] - need 5'''


[[Image:blenderhydraulics.jpg|600px]]
=Tractor (x3)=
(download Blender file [http://openpario.mime.oregonstate.edu/projects/lifetrac3d/files here])
==Main==
Parts from Surplus Center:


Functionality list:
See [[Parts Sourcing]] for contact information. Note: this includes hydraulics and balance of system after metal.


Note: Green indicates finalized shopping list from Surplus Center. Blue indicates list from McMaster Carr. Red is Dalton Hydralics. See [[Parts Sourcing]] for contact information.
#'''[8] 1-7/8" Flange Bearings - [https://www.surpluscenter.com/item.asp?item=1-210-30-4&catname=powerTrans] ; plus [http://www.amazon.com/4-Bolt-Flange-Bearings-UCF-210-30/dp/B0045JSZGS/ref=sr_1_2?ie=UTF8&s=industrial&qid=1304217266&sr=1-2 BearingsOn] plus [http://www.thebigbearingstore.com/servlet/the-85/1-dsh-7-fdsh-8%22-Four-Bolt-Flange/Detail Big Bearing Store]'''
#'''[2] Front Loader cylinders - 36" - $174 - 48 5/8" retracted length - [https://www.surpluscenter.com/item.asp?item=9-6775&catname=hydraulic] & [2] of [[https://www.surpluscenter.com/item.asp?item=9-7941-36&catname=hydraulic]]'''
#'''[2] QA Plate Cylinders -  [https://www.surpluscenter.com/item.asp?item=9-7619-30&catname=hydraulic]'''
#'''[4] 3/8 NPTM x 1/2 NPTF swivel [https://www.surpluscenter.com/item.asp?item=9-1404-6-8&catname=hydraulic] for QA Plate cylinders'''
#'''[4] 3/8 NPTM x 1/2 NPTF 90 swivel [https://www.surpluscenter.com/item.asp?item=9-1501-6-8&catname=hydraulic] for Loader cylinders'''
#'''[4] Motors - [https://www.surpluscenter.com/item.asp?item=9-7469&catname=]'''
##'''[8] SAE M 10 to NPT M 1/2" for Ports [https://www.surpluscenter.com/item.asp?item=9-6401-10-8&catname=hydraulic]'''
##'''[4] SAE 4M TO 1/4" NPTM CONNECTOR for Case Drains [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=9-6401-4-4]'''
##'''[8] 1/2" QC for Motors [https://www.surpluscenter.com/item.asp?item=928&catname=hydraulic]'''
##'''[4] 1/4" QC for motors [https://www.surpluscenter.com/item.asp?item=9-6314&catname=hydraulic]'''
#'''[2] 1-1/4 SHAFT COUPLER W 5/16" KEYWAY - [https://www.surpluscenter.com/item.asp?item=1-1563-J&catname=]'''
#'''[1 1/3] 1-3/8" 6T fully splined shafting - [https://www.surpluscenter.com/item.asp?item=1-2938-6&catname=]'''
#'''[2] Female 1-3/8" 6T spline coupling - [https://www.surpluscenter.com/item.asp?item=1-1562&catname=], $17 each'''
#[12] 1.875" double split shaft collars - [https://www.surpluscenter.com/item.asp?item=1-2768-187&catname=powerTrans]
#Double split - $11 - [http://www.dealsinapinch.com/ProductDetails.asp?ProductCode=A-DSA178]
#Double split - $9 -[https://www.houstonbearing.com/storefrontCommerce/cartAddItems.do Houston Bearing]
#Double split - $9 free ship - [http://www.fremontindustrialsupply.com/servlet/the-12491/%28Qty-of-10%29-1-dsh-7-fdsh-8%22/Detail]
#'''Single split - [https://www.surpluscenter.com/item.asp?item=1-2767-187&catname=powerTrans]'''


#<span style="color:#009000"> [8] 1-7/8" Flange Bearings - [https://www.surpluscenter.com/item.asp?item=1-210-30-4&catname=powerTrans] or 2-1/2" Flange Bearings [https://www.surpluscenter.com/item.asp?item=1-213-40-4&catname=powerTrans]
==Motor Valves (X3)==
#<span style="color:#009000">[2] Front Loader cylinders - 36" - $174 - 48 5/8" retracted length - [https://www.surpluscenter.com/item.asp?item=9-6775&catname=hydraulic]
#<span style="color:#009000"> [4] 3/8 NPTM x 1/2 NPTF 90 SWIVEL [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=9-1501-6-8] for Front Loader Cylinders up to hose
##4.9 square inch area at 2500 PSI implies 12000 lb of force for each cylinder
#<span style="color:#009000">[4] QA plate hydraulic cylinders <strike>& 2 Rear Loader</strike> [https://www.surpluscenter.com/item.asp?item=9-7619-30&catname=hydraulic]
#<span style="color:#009000">[4] Motors - [https://www.surpluscenter.com/item.asp?item=9-7469&catname=]
##[8] SAE M 10 to NPT M 1/2" for Ports [https://www.surpluscenter.com/item.asp?item=9-6401-10-8&catname=hydraulic]
##[4] SAE 4M TO 1/4" NPTM CONNECTOR for Case Drains [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=9-6401-4-4]
##[8] 1/2" QC for Motors [https://www.surpluscenter.com/item.asp?item=928&catname=hydraulic]
##[4] 1/4" QC for motors [https://www.surpluscenter.com/item.asp?item=9-6321&catname=hydraulic]
#<span style="color:#009000">[2] 1-1/4 SHAFT COUPLER W 5/16" KEYWAY - [https://www.surpluscenter.com/item.asp?item=1-1563-J&catname=]
#<span style="color:#009000">[2] 1-3/8" 6T fully splined shafting - [https://www.surpluscenter.com/item.asp?item=1-2938-6&catname=]
#<span style="color:#009000">[2] Female 1-3/8" 6T spline coupling - [https://www.surpluscenter.com/item.asp?item=1-1562&catname=], $30 each
#<span style="color:#009000">[12] 1.875" double split shaft collars - [https://www.surpluscenter.com/item.asp?item=1-2768-187&catname=powerTrans]
##got 10 double split
##got 2 single split - [https://www.surpluscenter.com/item.asp?item=1-2767-187&catname=powerTrans]
#<span style="color:#009000">[1] 1/2" male QC tip, which already have female part [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=928-aa]


==Valves==
*'''[1] 3-spool motor valve, 25 gpm - [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=9-6761], $288'''
*'''[3] 3/4" Nips [https://www.surpluscenter.com/item.asp?item=9-5404-12-12&catname=hydraulic] (includes cylinder valve, outlet tee)'''
*'''[1] 3/4" swivel - [https://www.surpluscenter.com/item.asp?item=9-1404-12-12&catname=hydraulic]
*'''[2] 3/4" Quick Couplers for one set of  motor valve work ports - Dalton Hydraulics'''
*'''[4] 1/2" Swivels for work ports [https://www.surpluscenter.com/item.asp?catname=&qty=1&item=9-1404-8-8] - for 2 sets of work ports to wheel motors'''
*'''[2] 3/4" tee for inlet + outlet - [https://www.surpluscenter.com/item.asp?item=9-5605-12-12-12&catname=hydraulic]'''
*'''[1] 3/4"-1/4" reducer for outlet - [https://www.surpluscenter.com/item.asp?item=9-5406-12-4&catname=hydraulic]
*'''[1] 3/4" elbow for inlet - [https://www.surpluscenter.com/item.asp?item=9-5500-12-12&catname=hydraulic]'''
*[1] 1/4" nip for case drain of pulverizer - [https://www.surpluscenter.com/item.asp?item=9-5404-4-4&catname=hydraulic]
*[1] 1/4" Quiuck Coupler - [https://www.surpluscenter.com/item.asp?item=9-6314&catname=hydraulic]
*'''[2] 30 GPM check valves for inlet - [https://www.surpluscenter.com/item.asp?item=9-7933-12-5&catname=hydraulic]'''
*[2] 3/4" QC for inlet - Dalton
*'''[5] 3/4"nips for inlet including valve in/out - [https://www.surpluscenter.com/item.asp?item=9-5404-12-12&catname=hydraulic]'''
*'''[2] 1/2 NPT hex nipples [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=9-5404-8-8]-for auxiliary pair of motor valve work ports'''
*[2] 3/4 NPT to 1/2 NPT bushing [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=9-5406-12-8] - auxiliary work ports - NA


*<span style="color:#009000">[1] 3-spool motor valve, 25 gpm - [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=9-6761], $288
==Loader Valve (X3)==
*<span style="color:#009000">[4] 1/2" Quick Couplers [https://www.surpluscenter.com/item.asp?item=928&catname=hydraulic] - for motor valve work ports
*<span style="color:#009000">[4] 1/2" NPT M to NPT M 90deg Elbow for Motor Valve working ports [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=9-5500-8-8] - for 2 sets of work ports to wheel motors
*<span style="color:#0000f1">[4] 3/4" NPT quick couplers - Dalton Hydraulics - 2 for in/out, 2 for auxiliary work ports
*<span style="color:#009000">[2] 1/2 NPT hex nipples [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=9-5404-8-8]-for auxiliary pair of motor valve work ports
*<span style="color:#009000">[2] 3/4 NPT hex nips [https://www.surpluscenter.com/item.asp?item=9-5404-12-12&catname=hydraulic] - in and out of valve
*<span style="color:#009000">[2] 3/4 NPT to 1/2 NPT bushing [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=9-5406-12-8] - auxiliary work ports


==OSE Danfoss Black 2 Spool==
*'''[1] Prince 2 Spool Valve - [https://www.surpluscenter.com/item.asp?item=9-6702&catname=hydraulic] $189'''
*'''[1] 3/4" NPT nip for outlet - [https://www.surpluscenter.com/item.asp?item=9-5404-12-12&catname=hydraulic]'''
*'''[4] 1/2" Swivels for work ports [https://www.surpluscenter.com/item.asp?catname=&qty=1&item=9-1404-8-8] - for 2 sets of work ports to wheel motors'''
*'''[1] 3/4" QC for outlet'''
*'''[2] 1/2" tees to split to 2 cylinders - [https://www.surpluscenter.com/item.asp?item=9-5605-8-8-8&catname=hydraulic]'''


*<span style="color:#009000">[4] SAE 8M TO 1/2" NPTM CONNECTOR for working ports [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=9-6401-8-8]
==Cushion Valve (X3)==
*<span style="color:#009000">[6] 1/2" NPT QUICK COUPLER F/F S20-4 [https://www.surpluscenter.com/item.asp?item=928&catname=hydraulic]
*<span style="color:#009000">[1] SAE 10 PLUG for OSE BLACK 2 Spool [https://www.surpluscenter.com/item.asp?item=9-6408-10&catname=hydraulic]
*<span style="color:#009000">[2] SAE 10M TO 1/2" NPT CONNECTOR [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=9-6401-10-8]


==3 Spool Husco==
*'''[1] 1/2 NPT 30 GPM 1500-3000 PSI HYD CUSHION VALVES - [https://www.surpluscenter.com/item.asp?item=9-4019-50-H&catname=hydraulic]'''
*<span style="color:red">[1] 3/4" NPT quick couplers - Dalton Hydraulics - 1 pair for inlet
*'''[6] 1/2" swivels [https://www.surpluscenter.com/item.asp?catname=&qty=1&item=9-1404-8-8] - 4 valve outlet + 2 cushion valve'''
*<span style="color:#009000">[1] 3/4" NPT nip - [https://www.surpluscenter.com/item.asp?item=9-5404-12-12&catname=hydraulic] - for inlet
*'''[2] 1/2" nip - [https://www.surpluscenter.com/item.asp?item=9-5404-8-8&catname=hydraulic] - going from between swivel and tee'''
*<span style="color:#009000">[3] 1/2" nip for return cross [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=9-5404-8-8]
*'''[4] NPTF Tee [https://www.surpluscenter.com/item.asp?item=9-5605-8-8-8&catname=hydraulic]- (includes QA plates'''
*<span style="color:#009000">[1] 1/2"-1/4" bushing - to accept case drain return [https://www.surpluscenter.com/item.asp?item=9-5406-8-4&catname=hydraulic]
*<span style="color:#009000">[2] quick coupler pairs for return line - [https://www.surpluscenter.com/item.asp?item=928&catname=hydraulic]
*<span style="color:blue">Pipe cross fitting on the return line to accommodate case drain return - [http://www.mcmaster.com/#iron-and-steel-pipe-fittings-and-pipe/=7vmyru]
*<strike>[1] SAE 12 M to NPT 3/4 M Connector [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=9-6401-12-12]</strike>
*<strike>[1] SAE 10M TO 1/2" NPT CONNECTOR [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=9-6401-10-8]</strike>
*<strike>[1] 1/2 X 1/2 X 1/2 NPTF TEE [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=9-5605-8-8-8]</strike>


==2 Spool Prince Valve==
=Power Cube (x5)=
*<strike>[1] 3/4" Quick Coupler for outlet (already included in central 3-spool motor valve)</strike>
*<span style="color:#009000">[2] 3/4" NPT nip for inlet/outlet - [https://www.surpluscenter.com/item.asp?item=9-5404-12-12&catname=hydraulic]
*[1] 3/4" NPT tee (already have these) for inlet
*<span style="color:#009000">[2] 3/4" to 1/2" bushings - [https://www.surpluscenter.com/item.asp?item=9-5406-12-8&catname=hydraulic]
*<span style="color:#009000">[1] 1/2" NPT male elbow - [https://www.surpluscenter.com/item.asp?item=9-5500-8-8&catname=hydraulic]
*<span style="color:#009000">[2] 1/2" quick coupler pairs - [https://www.surpluscenter.com/item.asp?item=928&catname=hydraulic]


==Cushion Valves==
*[1] Pump - 0.98 cu in - [https://www.surpluscenter.com/item.asp?item=9-1788-B&catname=]
*[1] 3/4" coupler for exit - Dalton
*'''[1] 3/4" breather cap -[https://www.surpluscenter.com/item.asp?catname=hydraulic&item=9-7285-75] - $13'''
*'''[1] Filler Cap - [https://www.surpluscenter.com/item.asp?item=9-7286&catname=hydraulic]'''
*'''[1] SAE 12 in to 3/4 hosebarb- [https://www.surpluscenter.com/item.asp?item=9-4604-12-12&catname=hydraulic]''' - GOT 1 FOR TESTING
*'''[1] SAE 10 out to 1/2 NPT - [https://www.surpluscenter.com/item.asp?item=9-6401-10-8&catname=hydraulic]'''
*[1] 3/4 to 1/2 reducer bushing - NA
*'''[1] Coupler half, 5/8" - [http://www.mcmaster.com/#6408k15/=1qajma $10]'''
*'''[1] Coupler half, 1 1/8" - [http://www.mcmaster.com/#6408k15/=1qakef $10]'''
*'''[1] Solid spider - [http://www.mcmaster.com/#6408k95/=1qale7 $14]'''
*'''[1] Suction strainer, 2" to 1-1/4" - [https://www.surpluscenter.com/item.asp?item=9-7290-125&catname=hydraulic] - $23'''
*1" female coupling into frame
*'''[1] 1" nip to filter - [https://www.surpluscenter.com/item.asp?item=9-5404-16-16&catname=hydraulic]'''
*'''[1] 30 GPM return Line Filter - [https://www.surpluscenter.com/item.asp?item=9-6461&catname=hydraulic]''' - 5 total of these
*'''[1] 1"-3/4" reducer bushing - [https://www.surpluscenter.com/item.asp?item=9-5406-16-12&catname=hydraulic]'''
*'''[1] 3/4" tee - [https://www.surpluscenter.com/item.asp?item=9-5605-12-12-12&catname=hydraulic]'''
*'''[2] 3/4" nip - [https://www.surpluscenter.com/item.asp?item=9-5404-12-12&catname=hydraulic]'''
*<span style="color:green">[1] 30 gpm Quick Coupler to return line
*'''[1] 3/4"-1/4" NPT reducer bushing for case drain - [https://www.surpluscenter.com/item.asp?item=9-5406-12-4&catname=hydraulic]'''
*'''[1] 1/4" nip - [https://www.surpluscenter.com/item.asp?item=9-5404-4-4&catname=hydraulic]'''
*'''[1] 1/4" quick couplers for case drain - [https://www.surpluscenter.com/item.asp?item=9-6314&catname=hydraulic]
'''


*<span style="color:#009000">[2] 1/2 NPT 30 GPM 1500-3000 PSI HYD CUSHION VALVES - [https://www.surpluscenter.com/item.asp?item=9-4019-50-H&catname=hydraulic]
=Soil Pulverizer (x1)=
*<span style="color:#009000">[4] 1/2" male QC tips to plug into valves, which already have female QCs [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=928-aa]
*<span style="color:#009000">[2] 1/2 NPTM x 1/2 NPTF swivel [https://www.surpluscenter.com/item.asp?catname=&qty=1&item=9-1404-8-8] for cushion valve to mount tees, for separating to right and left cylinders; only one swivel needed per cushion valve
*<span style="color:#009000">[4] 1/2" nip - [https://www.surpluscenter.com/item.asp?item=9-5404-8-8&catname=hydraulic] - going from between swivel and tee.
*<span style="color:#009000">[4] NPTF Tee [https://www.surpluscenter.com/item.asp?item=9-5605-8-8-8&catname=hydraulic]- 4 for loaders only, not QA plates


==Power Cube==
*'''[1] 7.6 cu in hydraulic PTO motor - [https://www.surpluscenter.com/item.asp?item=9-7368-125&catname=hydraulic]'''
 
*'''[2] 1-7/8" bearings - []'''
*Note: pump is already obtained
*'''[1] 6 tooth spline coupler - [https://www.surpluscenter.com/item.asp?item=1-1562&catname=hydraulic]''' (enough for 3)
 
*<span style="color:green">[4] 30 gpm Quick Coupler - Dalton
*<span style="color:#0000f1">[1] Coupler half, 5/8" - [http://www.mcmaster.com/#6408k15/=1qajma $10]
*'''[2] SAE 10 to 1/2 NPT swivel - [https://www.surpluscenter.com/item.asp?item=9-6900-10-8&catname=hydraulic]
*<span style="color:#0000f1">[1] Coupler half, 1" - [http://www.mcmaster.com/#6408k15/=1qakef $10]
*'''[1] SAE 4 to 1/4 NPT swivel- [https://www.surpluscenter.com/item.asp?item=9-6900-4-4&catname=hydraulic]'''
*<span style="color:#0000f1">[1] Solid spider - [http://www.mcmaster.com/#6408k95/=1qale7 $14]
*<strike>[1] Breather cap - [https://www.surpluscenter.com/item.asp?item=9-7285-75&catname=hydraulic] - $8 </strike>
**<span style="color:purple">[1] 3/4 NPT coupling - found at big box hardware stores
*<span style="color:green">[1] Suction strainer, 2" to 1-1/4" - [https://www.surpluscenter.com/item.asp?item=9-7290-125&catname=hydraulic] - $23
**Use for dual Power Cubes
**<span style="color:purple">[1] Use 2" coupler from bix box store to thread into Power Cube frame
*<span style="color:green">[1] Pressure relief for power cube bypass- [https://www.surpluscenter.com/item.asp?item=9-6135-50-H&catname=hydraulic]
*[1] 20 GPM return Line Filter - [https://www.surpluscenter.com/item.asp?item=9-059&catname=hydraulic]
*[1] 3/4" NPT Swivel for return line filter going into frame - [https://www.surpluscenter.com/item.asp?item=9-1404-12-12&catname=hydraulic]
*[2] 3/4" NPT hex nip on both sides of filter - [https://www.surpluscenter.com/item.asp?item=9-5404-12-12&catname=hydraulic]
*[1] 1"-3/4" NPT reducer bushing for frame receptacle for return filter - [https://www.surpluscenter.com/item.asp?item=9-5406-16-12&catname=hydraulic]
*[1] 3/4" quick coupler for return line to filter
*[2] 1/2" quick couplers for main power lines
*
 
Hoses:
 
*[1] 2 foot hose from pump outlet to return line filter - [https://www.surpluscenter.com/item.asp?item=905-1224&catname=hydraulic]
*[2] 10 foot hoses, already have these - [https://www.surpluscenter.com/item.asp?item=905-12120&catname=hydraulic]
 
Pressure Bypass:
 
*[1] 1/2" NPT Bypass valve - [https://www.surpluscenter.com/item.asp?item=9-6135-50-H&catname=hydraulic]
*[3] 1/2" Quick couplers - 1 complete for tee near pump, one going from return filter to tee, and male tip for return line. This gives one extra female quick coupler left over. This set of 3 QCs does not cover hoses going from and to the PowerCube.
*[4] 1/2" NPTF hex nip for one and other side of tee, on both tees - [https://www.surpluscenter.com/item.asp?item=9-5404-8-8&catname=hydraulic]
*[2] 1/2" NPTF tee - from outlet of pump to pressure bypass, and from bypass valve into return line filter - [https://www.surpluscenter.com/item.asp?item=9-5605-8-8-8&catname=hydraulic]


=Hoses=
=Hoses=


==Between Motor Valves & Motors==
==Soil Pulverizer (x1)==
*<span style="color:green">[4] 1/2" X 36" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE for in/out of the valves [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=905-1236]
*'''[2] 1/2"x12' hose - [https://www.surpluscenter.com/item.asp?item=905-12144&catname=hydraulic]'''
*<span style="color:green">[4] 1/2" X 36" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE for in/out of front motors [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=905-1236]
*'''[1] 1/4"x12' hose - [https://www.surpluscenter.com/item.asp?item=916-14144&catname=hydraulic]'''
*<span style="color:green">[4] 1/2 X 1/2 X 1/2 NPTF TEE [https://www.surpluscenter.com/item.asp?item=9-5605-8-8-8&catname=hydraulic]
*<span style="color:green">[4] 1/2" X 48" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE for rear motors [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=905-1248]


==Motor Case Drains==
==Power Cube (x1 bc it's broken down)==
*<span style="color:green">[2] 1/4" X 72" NPTM 2750 PSI HYD HOSE to run parallel with tractor sides [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=916-1472]
*'''[4] 10 foot hoses - [https://www.surpluscenter.com/item.asp?item=905-12120&catname=hydraulic]'''
*<span style="color:green">[1] 1/4" X 30" NPTM 2750 PSI HYD HOSE from Tee to Tee in return hose [https://www.surpluscenter.com/item.asp?item=916-1430&catname=hydraulic]
*'''[6] 8 foot hoses - [https://www.surpluscenter.com/item.asp?item=905-1296&catname=hydraulic]'''
*<span style="color:green">[1] 1/4" X 36" NPTM 2750 PSI HYD HOSE to Rear Motors [https://www.surpluscenter.com/item.asp?item=916-1436&catname=hydraulic]
*<span style="color:green">[3] 1/4 X 1/4 X 1/4 NPTF TEE [https://www.surpluscenter.com/item.asp?item=9-5605-4-4-4&catname=hydraulic]
*<span style="color:green">[3] 1/4 NPT hex nipples [https://www.surpluscenter.com/item.asp?item=9-5404-4-4&catname=hydraulic]
*[4] 1/4" NPT quick couplers are already with the motors


==Front Loader==
==Motor Valves (x3)==
*<span style="color:green">[2] 1/2" X 12" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE from Valves to Cushion [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=905-1212]
*'''[4] 1/2" X 36" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE for in/out of the valves [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=905-1236]'''
*<span style="color:green">[2] 1/2" X 36" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE for '''left''' front loader cylinder [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=905-1236]
*'''[4] 1/2" X 36" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE for in/out of front motors [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=905-1236]'''
*<span style="color:green">[1] 1/2" X 48" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE for '''right''' front loader cylinder [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=905-1248]
*'''[4] 1/2 X 1/2 X 1/2 NPTF TEE [https://www.surpluscenter.com/item.asp?item=9-5605-8-8-8&catname=hydraulic]'''
*<span style="color:green">[1] 1/2" X 60" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE for '''right''' front loader cylinder [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=905-1260]
*'''[4] 1/2" X 48" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE for rear motors [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=905-1248]'''
==Motor Case Drains (x3)==
*'''[2] 1/4" X 60" NPTM 2750 PSI HYD HOSE to run parallel with tractor sides [https://www.surpluscenter.com/item.asp?item=916-1460&catname=hydraulic]'''
*'''[1] 1/4" X 72" hose return to Power Cube [https://www.surpluscenter.com/item.asp?item=916-1472&catname=hydraulic]'''
*'''[1] 1/4" X 36" NPTM 2750 PSI HYD HOSE to Rear Motors [https://www.surpluscenter.com/item.asp?item=916-1436&catname=hydraulic]'''
*'''[3] 1/4 X 1/4 X 1/4 NPTF TEE [https://www.surpluscenter.com/item.asp?item=9-5605-4-4-4&catname=hydraulic]'''
*'''[3] 1/4 NPT hex nipples [https://www.surpluscenter.com/item.asp?item=9-5404-4-4&catname=hydraulic]'''


==Front loader QA Cylinder Hoses==
==Front Loader (x3)==
*<span style="color:green">[4] 3/8" NPTM x 1/2" NPTF swivel - [https://www.surpluscenter.com/item.asp?item=9-1404-6-8&catname=hydraulic] - swivels for QA cylinders
*'''[2] 1/2" X 12" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE from Valves to Cushion [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=905-1212]'''
*<span style="color:green">[2] 1/2" nips - going from cylinder swivels to tees - [https://www.surpluscenter.com/item.asp?item=9-5404-8-8&catname=hydraulic]
*'''[2] 1/2" X 36" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE for '''left''' front loader cylinder [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=905-1236]'''
*<span style="color:green">[2] 1/2" NPTF tees - from cylinder to hoses - [https://www.surpluscenter.com/item.asp?item=9-5605-8-8-8&catname=hydraulic]
*'''[1] 1/2" X 48" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE for '''right''' front loader cylinder [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=905-1248]'''
*<span style="color:green">[2] male QC tips - for plugging into control valves - [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=928-aa]
*'''[1] 1/2" X 60" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE for '''right''' front loader cylinder [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=905-1260]
*<span style="color:green">[2] 1/2" X 48" NPTM 3000 PSI HYD HOSE [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=905-1248]
'''
*<span style="color:green">[1] 1/2" X 120" NPTM 3000 PSI HYD HOSE [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=905-12120]
*<span style="color:green">[1] 1/2" X 144" NPTM 3000 PSI HYD HOSE [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=905-12144]


==Rear Loader Hoses==
==QA Cylinder (x3)==
*<span style="color:green">[2] 1/2" X 12" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE to Cushion Valve [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=905-1212]
*'''[2] 1/2" nips - going from cylinder swivels to tees - [https://www.surpluscenter.com/item.asp?item=9-5404-8-8&catname=hydraulic]'''
*<span style="color:green">[1] 1/2" X 60" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=905-1260]
*'''[2] 1/2" NPTF tees - from cylinder to hoses - [https://www.surpluscenter.com/item.asp?item=9-5605-8-8-8&catname=hydraulic]'''
*<span style="color:green">[1] 1/2" X 96" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=905-1296]
*'''[2] 1/2" X 48" NPTM 3000 PSI HYD HOSE [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=905-1248]'''
*<span style="color:green">[1] 1/2" X 84" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=905-1284]
*'''[1] 1/2" X 120" NPTM 3000 PSI HYD HOSE [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=905-12120]'''
*<span style="color:green">[1] 1/2" X 120" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=905-12120]
*'''[1] 1/2" X 144" NPTM 3000 PSI HYD HOSE [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=905-12144]
'''


==Rear loader Q.A. Cylinder Hoses==
[[Category:April 2011 Production Run]]
*<span style="color:green">[4] 3/8" NPTM x 1/2" NPTF swivel - [https://www.surpluscenter.com/item.asp?item=9-1404-6-8&catname=hydraulic] - swivels for QA cylinders
[[Category:BOM]]
*<span style="color:green">[2] 1/2" nips - going from cylinder swivels to tees - [https://www.surpluscenter.com/item.asp?item=9-5404-8-8&catname=hydraulic]
*<span style="color:green">[2] 1/2" NPTF tees - from cylinder to hoses - [https://www.surpluscenter.com/item.asp?item=9-5605-8-8-8&catname=hydraulic]
*<span style="color:green">[2] male QC tips - for plugging into control valves - [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=928-aa]
*<span style="color:green">[2] 1/2" X 48" NPTM 3000 PSI HYD HOSE [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=905-1248]
*<span style="color:green">[1] 1/2" X 120" NPTM 3000 PSI HYD HOSE [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=905-12120]
*<span style="color:green">[1] 1/2" X 144" NPTM 3000 PSI HYD HOSE [https://www.surpluscenter.com/item.asp?catname=hydraulic&qty=1&item=905-12144]

Latest revision as of 10:06, 10 October 2011

Generator (X1)

  1. [1] hydraulic motor for direct 1800RPM generator drive - [1]
  2. [1] 5/8" coupler - [2]

Other (X5)

  1. [1] Power Cube Throttle Cable - [3] - need 5
  2. Battery Cable - [4] - need 3
  3. Starter Solenoid - [5] - need 5
  4. Key Switch - [6] - need 5
  5. Fuel Hose Barb - [7] - need 5

Tractor (x3)

See Parts Sourcing for contact information. Note: this includes hydraulics and balance of system after metal.

  1. [8] 1-7/8" Flange Bearings - [8] ; plus BearingsOn plus Big Bearing Store
  2. [2] Front Loader cylinders - 36" - $174 - 48 5/8" retracted length - [9] & [2] of [[10]]
  3. [2] QA Plate Cylinders - [11]
  4. [4] 3/8 NPTM x 1/2 NPTF swivel [12] for QA Plate cylinders
  5. [4] 3/8 NPTM x 1/2 NPTF 90 swivel [13] for Loader cylinders
  6. [4] Motors - [14]
    1. [8] SAE M 10 to NPT M 1/2" for Ports [15]
    2. [4] SAE 4M TO 1/4" NPTM CONNECTOR for Case Drains [16]
    3. [8] 1/2" QC for Motors [17]
    4. [4] 1/4" QC for motors [18]
  7. [2] 1-1/4 SHAFT COUPLER W 5/16" KEYWAY - [19]
  8. [1 1/3] 1-3/8" 6T fully splined shafting - [20]
  9. [2] Female 1-3/8" 6T spline coupling - [21], $17 each
  10. [12] 1.875" double split shaft collars - [22]
  11. Double split - $11 - [23]
  12. Double split - $9 -Houston Bearing
  13. Double split - $9 free ship - [24]
  14. Single split - [25]

Motor Valves (X3)

  • [1] 3-spool motor valve, 25 gpm - [26], $288
  • [3] 3/4" Nips [27] (includes cylinder valve, outlet tee)
  • [1] 3/4" swivel - [28]
  • [2] 3/4" Quick Couplers for one set of motor valve work ports - Dalton Hydraulics
  • [4] 1/2" Swivels for work ports [29] - for 2 sets of work ports to wheel motors
  • [2] 3/4" tee for inlet + outlet - [30]
  • [1] 3/4"-1/4" reducer for outlet - [31]
  • [1] 3/4" elbow for inlet - [32]
  • [1] 1/4" nip for case drain of pulverizer - [33]
  • [1] 1/4" Quiuck Coupler - [34]
  • [2] 30 GPM check valves for inlet - [35]
  • [2] 3/4" QC for inlet - Dalton
  • [5] 3/4"nips for inlet including valve in/out - [36]
  • [2] 1/2 NPT hex nipples [37]-for auxiliary pair of motor valve work ports
  • [2] 3/4 NPT to 1/2 NPT bushing [38] - auxiliary work ports - NA

Loader Valve (X3)

  • [1] Prince 2 Spool Valve - [39] $189
  • [1] 3/4" NPT nip for outlet - [40]
  • [4] 1/2" Swivels for work ports [41] - for 2 sets of work ports to wheel motors
  • [1] 3/4" QC for outlet
  • [2] 1/2" tees to split to 2 cylinders - [42]

Cushion Valve (X3)

  • [1] 1/2 NPT 30 GPM 1500-3000 PSI HYD CUSHION VALVES - [43]
  • [6] 1/2" swivels [44] - 4 valve outlet + 2 cushion valve
  • [2] 1/2" nip - [45] - going from between swivel and tee
  • [4] NPTF Tee [46]- (includes QA plates

Power Cube (x5)

  • [1] Pump - 0.98 cu in - [47]
  • [1] 3/4" coupler for exit - Dalton
  • [1] 3/4" breather cap -[48] - $13
  • [1] Filler Cap - [49]
  • [1] SAE 12 in to 3/4 hosebarb- [50] - GOT 1 FOR TESTING
  • [1] SAE 10 out to 1/2 NPT - [51]
  • [1] 3/4 to 1/2 reducer bushing - NA
  • [1] Coupler half, 5/8" - $10
  • [1] Coupler half, 1 1/8" - $10
  • [1] Solid spider - $14
  • [1] Suction strainer, 2" to 1-1/4" - [52] - $23
  • 1" female coupling into frame
  • [1] 1" nip to filter - [53]
  • [1] 30 GPM return Line Filter - [54] - 5 total of these
  • [1] 1"-3/4" reducer bushing - [55]
  • [1] 3/4" tee - [56]
  • [2] 3/4" nip - [57]
  • [1] 30 gpm Quick Coupler to return line
  • [1] 3/4"-1/4" NPT reducer bushing for case drain - [58]
  • [1] 1/4" nip - [59]
  • [1] 1/4" quick couplers for case drain - [60]

Soil Pulverizer (x1)

  • [1] 7.6 cu in hydraulic PTO motor - [61]
  • [2] 1-7/8" bearings - []
  • [1] 6 tooth spline coupler - [62] (enough for 3)
  • [4] 30 gpm Quick Coupler - Dalton
  • [2] SAE 10 to 1/2 NPT swivel - [63]
  • [1] SAE 4 to 1/4 NPT swivel- [64]

Hoses

Soil Pulverizer (x1)

  • [2] 1/2"x12' hose - [65]
  • [1] 1/4"x12' hose - [66]

Power Cube (x1 bc it's broken down)

  • [4] 10 foot hoses - [67]
  • [6] 8 foot hoses - [68]

Motor Valves (x3)

  • [4] 1/2" X 36" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE for in/out of the valves [69]
  • [4] 1/2" X 36" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE for in/out of front motors [70]
  • [4] 1/2 X 1/2 X 1/2 NPTF TEE [71]
  • [4] 1/2" X 48" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE for rear motors [72]

Motor Case Drains (x3)

  • [2] 1/4" X 60" NPTM 2750 PSI HYD HOSE to run parallel with tractor sides [73]
  • [1] 1/4" X 72" hose return to Power Cube [74]
  • [1] 1/4" X 36" NPTM 2750 PSI HYD HOSE to Rear Motors [75]
  • [3] 1/4 X 1/4 X 1/4 NPTF TEE [76]
  • [3] 1/4 NPT hex nipples [77]

Front Loader (x3)

  • [2] 1/2" X 12" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE from Valves to Cushion [78]
  • [2] 1/2" X 36" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE for left front loader cylinder [79]
  • [1] 1/2" X 48" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE for right front loader cylinder [80]
  • [1] 1/2" X 60" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE for right front loader cylinder [81]

QA Cylinder (x3)

  • [2] 1/2" nips - going from cylinder swivels to tees - [82]
  • [2] 1/2" NPTF tees - from cylinder to hoses - [83]
  • [2] 1/2" X 48" NPTM 3000 PSI HYD HOSE [84]
  • [1] 1/2" X 120" NPTM 3000 PSI HYD HOSE [85]
  • [1] 1/2" X 144" NPTM 3000 PSI HYD HOSE [86]

Retrieved from "https://wiki.opensourceecology.org/index.php?title=April_2011_Production_Run_Hydraulics_BOM&oldid=44745"