Janyuary-February Goals for Torch Table

Introduction

As the workshop nears completion and the inside wall for the utility space is being put up, here are my commitments to the torch table, and CEB project, development.

Personally, I've been publishing the Factor e Live Distillations series - which is critical to laying the groundwork for OSE collaboration, so I prioritized it above the CEB fabrication torch table. This produced a month delay in the Torch Table.

CEB Press Deployment Timeline

• January 25 - rest and post these commitments, lay out plan for torch table; finish 3D design on Torch Table; publish Distillations Part 7

• 26, Mon - Picked up Nathan; basically finished bricking-in the utility area; worked till 8 PM - too late - as too tired next day
• 27 Tuesday - ordered passport pictures, worked on publicity material for 1000 Squared, got Nathan settled in; went food shopping to Jamesport; did Prototype one of open source v-grafting tool; edited publicity material for 1000 Squared from Matthew
• 28 Wednesday - composed initial 3D of torch table with Jeremy, updated sourcing info on Torch Table; prepared hot water tank; wrote part of Solar Turbine distillation
• 29 Thursday - Finish transcript of Solar Turbine project by noon; Finish 3D torch table with Jeremy by 2; work on Babington / water tank - close in water tank, add fittings till 6; need thread tape and other parts - publish BOM for torch table, for gantry
• 30 Friday - Order bearings for torch table;Order gears for Torch table;Order bolts for torch table;Publish Solar Turbine Distillations;Mount rail and gear rack on torch table;
• 31 - Order bolts for torch table; Start Babington Installation - Install Linux, LinuxCNC, and Test Motors for Torch Table;publish Torch Table Marketing Plan ; Publish distillatins on OSE Business Model; Assemble torch table frame; order torch head; do Sawmill Project Distillation ublish Distillations on Solar Turbine project; post design for review to Jack C, DIY CNC groupPick up metal for torch table, sawmill, and steam engine; Babington - me; Shower - rest of team; Publish Lathe design; Start assembling torch table gantry; Distillations on Marketing Plan
• February 1 - Rest day - Collaborative Development Process Distillation writing
• Feb 2, Monday - Begin assembling gantry; Summary of Distillations
• 3 - Gantry assembly day 2
• 4 - Gantry assembly day 3
• 5 - Gantry assembly day 4; end of Distillations Series
• 6 - Gantry assembly day 5
• 7 - Gantry assembly day 6 - *publish CEB marketing plan;
• 8 - Rest day
• Week 2 of February - Install bearings, xy and z drive system towards completion
• Week 3 of February - Torch table testing - dimensionally-correct torch holes in sample metal
• Week 4 of February - Tie up loose ends, begin CEB Prototype 2 with digital assist.

• March, Week 1 - Order other parts for Prototype 2, order hydraulic solenoid valves, implement Arduino solenoid control
• March, Week 2 - Build large hopper assembly
• March, Week 4 - test CEB press with automatic controls
• April, Week 1 - Test large hopper operation
• April, Week 2 - optimize fabrication with Prototype 3
• April, Week 4 - Integrate and document CEB system
• May 1 - 2009 - Begin taking orders