Talk:Power Cube/User's Manual: Difference between revisions
Jump to navigation
Jump to search
(Created page with "i added a specifications section. i put information i was pretty sure about on there. i did the math for flow based on rpm predicted on the briggs website. i think it might be po...") |
(No difference)
|
Latest revision as of 21:20, 25 July 2012
i added a specifications section. i put information i was pretty sure about on there. i did the math for flow based on rpm predicted on the briggs website. i think it might be possible to use the sketchup drawing to get the volume of all the steel on the frame and use a standard density number of steel to get the weight. then could probly do the same for the fluids. then also guess on the hoses. --Dorkmo 23:20, 25 July 2012 (CEST)