Hydraulic Valve: Difference between revisions
Jump to navigation
Jump to search
| Line 7: | Line 7: | ||
lost wax idea | lost wax idea | ||
https://docs.google.com/open?id=0BwxMMqGvwTM- | https://docs.google.com/open?id=0BwxMMqGvwTM-MlM0Z09uMzQ0RlE | ||
two molds. inner and outer. sand and plaster? make outer mold. fill and cure 3d printed inner mold. insert into outer mold. pour alum(?) in and melt abs. mill bottom flat. mill hole through spool area. tap ends to attach solenoids. | two molds. inner and outer. sand and plaster? make outer mold. fill and cure 3d printed inner mold. insert into outer mold. pour alum(?) in and melt abs. mill bottom flat. mill hole through spool area. tap ends to attach solenoids. | ||
Revision as of 04:45, 20 October 2012
industrial manifold standard
https://docs.google.com/open?id=0BwxMMqGvwTM-eHpYRGdOVTZ2VU0
D03
casting
lost wax idea
https://docs.google.com/open?id=0BwxMMqGvwTM-MlM0Z09uMzQ0RlE
two molds. inner and outer. sand and plaster? make outer mold. fill and cure 3d printed inner mold. insert into outer mold. pour alum(?) in and melt abs. mill bottom flat. mill hole through spool area. tap ends to attach solenoids.