Stock Pivot Plate: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
[[Image:stockpivot2.jpg|600px]] | [[Image:stockpivot2.jpg|600px]] | ||
Note: the above is a CAM file generator for the pivot plate. In practice, a 4.5" OD [[DOM]] with 3" ID is welded inside the 4.875" hole (Mickey Mouse hole) to generate a pivot plate for a 3" shaft. | |||
*[[File:Stock_Pivot_Plate.skp]] | *[[File:Stock_Pivot_Plate.skp]] | ||
*[[File:Stock_Bonding_Plate_8_inches_x_16_inches.skp]] | *[[File:Stock_Bonding_Plate_8_inches_x_16_inches.skp]] | ||
Revision as of 17:11, 21 May 2013
Note: the above is a CAM file generator for the pivot plate. In practice, a 4.5" OD DOM with 3" ID is welded inside the 4.875" hole (Mickey Mouse hole) to generate a pivot plate for a 3" shaft.
- File:Stock Pivot Plate.skp
- File:Stock Bonding Plate 8 inches x 16 inches.skp
- File:Stock Spacer Plate 8 inches x 8 inches.skp
Notes
This is an official file release with dimensions. Current as of May 17, 2013. Newer versions will be uploaded here.
We can then print these out according to the Ultimaker Post on Using Sketchup for 3D Printing.