50 hp Power Cube: Difference between revisions
Jump to navigation
Jump to search
(→Links) |
Tom Griffing (talk | contribs) (→CAD) |
||
| Line 2: | Line 2: | ||
Download Sketchup - [[File:pc50.zip]] | Download Sketchup - [[File:pc50.zip]] | ||
Note: This model is a first attempt at framing a Volkswagen engine in a Power Cube. The pumps shown are crude models of triple pumps for powering three independent hydraulic circuits for a LifeTrac. | |||
[[Image:pc50.jpg|400px]] | [[Image:pc50.jpg|400px]] | ||
Note: This model shows a cooler that was used for the prior 28 hp power cube. For updated cooler information see the following link: | |||
[http://opensourceecology.org/wiki/Hydraulic_Cooler_Sizing#Selecting_a_Cooler | Selecting A Cooler] | |||
[[Image:pc50guts.jpg|400px]] | [[Image:pc50guts.jpg|400px]] | ||
Revision as of 01:55, 3 June 2013
CAD
Download Sketchup - File:Pc50.zip
Note: This model is a first attempt at framing a Volkswagen engine in a Power Cube. The pumps shown are crude models of triple pumps for powering three independent hydraulic circuits for a LifeTrac.
Note: This model shows a cooler that was used for the prior 28 hp power cube. For updated cooler information see the following link:
| Selecting A Cooler
