Revision as of 00:11, 8 June 2013

2 Week Crash Course Covering

OSE's LifeTrac Construction Set design paradigm.
Sketchup CAD design and generation of 3D printing and DXF cutting files.
Crash academy in generation of animations going from Sketchup to Blender
Crash course in Instructionals generation starting with Script, Khan-Academy Style Instructionals, and Popcorn Maker upgrade.
Crash course in Documentation by posting a Concept Design and Technical Design page for a given project on the wiki
Manual plasma cutting
TIG and MIG welding
Acetylene torch cutting
Mag drilling
Ironworker machine operation
Power Cube operation
LifeTrac Operation.
Building a CNC controller for the brick press via a CNC Circuit Mill starting from raw schematic files
Operating the CNC torch table starting from the design of a custom part.
Operating HydraFabber to produce a 3D print of a piece of 3/8" tubing starting from scratch, and to cut a 3/8" piece of tubing from card stock using diode laser cutter

Exam

Starting a LifeTrac seeded with several failure modes that the student is required to identify and correct prior to starting the tractor
Starting up a MIG welder to weld 1/2" steel from a starting point of setup, including gas, wire feed, proper gas feed, and correct power settings

@@ Line 13: / Line 13: @@
 *Power Cube operation
 *LifeTrac Operation.
+*Building a CNC controller for the brick press via a CNC Circuit Mill starting from raw schematic files
+*Operating the CNC torch table starting from the design of a custom part.
+*Operating HydraFabber to produce a 3D print of a piece of 3/8" tubing starting from scratch, and to cut a 3/8" piece of tubing from card stock using diode laser cutter
 =Exam=
 *Starting a LifeTrac seeded with several failure modes that the student is required to identify and correct prior to starting the tractor
 *Starting up a MIG welder to weld 1/2" steel from a starting point of setup, including gas, wire feed, proper gas feed, and correct power settings