Tractor Construction Set Critical Modules: Difference between revisions
Jump to navigation
Jump to search
(→Review) |
(→Review) |
||
| Line 4: | Line 4: | ||
=Review= | =Review= | ||
==Microtrac== | |||
*Cross stagger the wheels | |||
*Make XYZ corner on top of frame | |||
*Make microtrac tracks longer so there is a lower number of them | *Make microtrac tracks longer so there is a lower number of them | ||
*Close off bed of Truck - needs a gate | *Close off bed of Truck - needs a gate | ||
*Stagger microtrac wheels | *Stagger microtrac wheels | ||
Revision as of 15:26, 10 June 2013
Review
Microtrac
- Cross stagger the wheels
- Make XYZ corner on top of frame
- Make microtrac tracks longer so there is a lower number of them
- Close off bed of Truck - needs a gate
- Stagger microtrac wheels
- Make pivot supported by 4 corners of Frame Module
- Modularize cab
- Modularize pivot unit - right now it's one with 2 degrees of freedom - make 2 with 1 degree of freedom for modularity.
- modularize engine unit in truck
- Need tight clamp-on wheel mounts hubs - with Keyway - truck
Example: