Leandra's Log: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
Line 47: Line 47:
[https://docs.google.com/drawings/d/16s41m3XjdL0V-uQW-Deka5wBPZBOuNIgQlMCf45NCzg/edit?hl=en&forcehl=1 Google Doc for Dozer Hydraulics]
[https://docs.google.com/drawings/d/16s41m3XjdL0V-uQW-Deka5wBPZBOuNIgQlMCf45NCzg/edit?hl=en&forcehl=1 Google Doc for Dozer Hydraulics]


'''Sourcing'''
===Sourcing===
*A 3/4" hose x2: https://www.surpluscenter.com/item.asp?item=9-078-30&catname=hydraulic
*A 3/4" hose x2: https://www.surpluscenter.com/item.asp?item=9-078-30&catname=hydraulic
*B 3/4" Quick Connect Couplers x2: https://www.surpluscenter.com/item.asp?item=9-8313&catname=hydraulic
*B 3/4" Quick Connect Couplers x2: https://www.surpluscenter.com/item.asp?item=9-8313&catname=hydraulic

Revision as of 05:55, 18 June 2013

June 17, 2013

Google Doc for Loader Arm Module Hydraulics

Sourcing

Considered using this, could have possible application in the future: https://www.surpluscenter.com/item.asp?item=9-7367&catname=hydraulic 5 Spool combo.jpg

Google Doc of Cab Module Hydraulics


Sourcing

June 14, 2013

Google Doc for Dozer Hydraulics

Sourcing

June 13, 2013

Error creating thumbnail: File missing
Error creating thumbnail: File missing

DozerBladePivot.PNG


June 12, 2013

  • Began work on the modular redesign of the loader arms File:LoaderArm1a.skp. Still needs lots of work, look into sourcing and prices of larger bore hydraulic cylinders.
  • After a discussion with Marcin, revisited the dozer blade to create the design for the actual blade as well as the mounting structure. Led to small alterations with the mount, but not much. Will need to do some minor adjustments and measurements on it tomorrow. File:DozerBlade3.skp
Error creating thumbnail: File missing
Error creating thumbnail: File missing
Error creating thumbnail: File missing




June 11, 2013

The hydraulic cylinders are sourced: Angle: https://www.surpluscenter.com/item.asp?item=9-7261-10&catname=hydraulic Tilt: https://www.surpluscenter.com/item.asp?item=9-8262-06&catname=hydraulic

Error creating thumbnail: File missing
Error creating thumbnail: File missing

June 10, 2013

Error creating thumbnail: File missing
  • This design is based off the modular dozer blade found here:

http://www.degelman.com/products/material_handling/dozer_blades/5900/index.php

Error creating thumbnail: File missing
  • Hydraulic cylinder for angle:

http://www.amazon.com/inch-Bore-stroke-Hydraulic-Cylinder/dp/B00BKPMRD2

  • Hydraulic cylinder for tilt:

http://baileynet.com/hydraulics/maxim_msv_welded_hydraulic_cylinders/?dnfwd=1&page=Details&line=MSV&baileyno=400-529

June 7, 2013

  • Revisited the attachment for the File:DozerBlade1.skp, made a new way of joining the arm to the blade for movement in six directions. Here are screen shots of the preliminary designs:
Error creating thumbnail: File missing
Error creating thumbnail: File missing
  • This is the more complete model. The dark blue pieces represent hydraulic pistons and where they would attach. This is still a sort of rough sketch. Measurements are not exact. However the central plate allows the blade to have tilt, while the pin attached to the plate gives it the forward and back angled motion. This design attaches the dozer blade to the LifeTrac (File:3DLifeTrac.skp):
Error creating thumbnail: File missing
Error creating thumbnail: File missing
Error creating thumbnail: File missing
Error creating thumbnail: File missing


June 6, 2013

Current ideas and designs found online for the Bulldozer 6-way Blade:

  • This one is the most modular design with very compact and simple hydraulics:

http://www.degelman.com/products/material_handling/dozer_blades/5900/index.php

  • Detailed description of one style for mounting arms and hydraulic control (4-way):

http://www.freepatentsonline.com/7013983.pdf

  • Good Specs on weights, heights, and angles for varying widths of 6-way blades:

http://www.freepatentsonline.com/7013983.pdf

  • Having difficulty determining if this joint is feasible or strong enough. Trying to adapt the concept of a large bearing joint for the entire arm of the dozer blade attachment.

Here are some images of the joint:

Error creating thumbnail: File missing
Error creating thumbnail: File missing


June 5, 2013

  1. Corrected orientation of PowercubeFile:PTcube2.skp in design. Updated version: File:Microtrac preliminary.skp
  2. Altered Quick Connect Wheels and motors to fit the MicroTrac.
  3. Designed the hub attachment to fit wheel to shaft for both the 20" and 21" donuts at the shop.
  4. Began research on bulldozer blades in order to begin design process.
Error creating thumbnail: File missing
Error creating thumbnail: File missing
Error creating thumbnail: File missing

June 4, 2013

This is the microtrac frame with a powercube File:PTcube2.skp. Sorry its upside down, its just for size reference at this point. Also it has the Quick Connect Wheels and the wheels with tracks File:Micro fulltrack6 4.skp.

Error creating thumbnail: File missing
June 4, 2013 MicroTrac Design File:Microtrac preliminary.skp

June 3, 2013

Error creating thumbnail: File missing
June 3, 2013 MicroTrac Frame File:Framewarehouse.skp

This is an updated model of the frame for the microtrac using the warehouse tubing found in the File:Warehouse.skp.