Stock Pivot Plate: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
DXF file - [[File:stockpivot.dxf]] | DXF file - [[File:stockpivot.dxf]] | ||
[[Image:stockpivot.jpg]] | |||
[[Image:stockpivot2.jpg|600px]] | [[Image:stockpivot2.jpg|600px]] | ||
Revision as of 18:38, 19 June 2013
DXF file - File:Stockpivot.dxf
Note: the above is used to generate a CAM file for CNC Torch Table cutting and Laser Cutter modeling - for the pivot plate. In practice, a 4.5" OD DOM with 3" ID is welded inside the 4.875" hole (Mickey Mouse hole) to generate a pivot plate for a 3" shaft. To generate a CAM file for 3D printing, one must consider the 3" tubing and print out a 3" hole, not a 4.875" hole.
- File:Stock Pivot Plate.skp
- File:Stock Bonding Plate 8 inches x 16 inches.skp
- File:Stock Spacer Plate 8 inches x 8 inches.skp
Notes
This is an official file release with dimensions. Current as of May 17, 2013. Newer versions will be uploaded here.
We can then print these out according to the Ultimaker Post on Using Sketchup for 3D Printing.