D3D Workbench: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
(Redirected page to 3D Printer Workbench 2020)
 
(20 intermediate revisions by the same user not shown)
Line 1: Line 1:
=Specification=
#redirect [[3D Printer Workbench 2020]]
The workbench should allow for selecting of 10 modules. Various configurations of axes can be selected by the individual import of X, Y and Z axes. This allows for piggy-backing axes (back to back with 2 axes), using multiple axis for X (see [[D3D Geometry]]), stacking axes (2 axes oriented next to each other in the Z direction) - and any other geometry - such as 4 axes to hold a large print platform, or single-sided support of the print bed, etc
 
==MVP==
*Workbench has buttons to import :
:*Frame - up to 24" on each side
:*Frame extension - such as 6' tall or wide 3d printer, with other sides only up to 24"
:*Universal Axis - length can be changed. Orientation of belt hole can be changed (up or down). Location of motor can be changed (front or back of Motor Mount Piece)
:*Extruder with sensor holder + sensor
:*Heated bed - size can be changed from 5" to 24"
:*Controller
:*Power Supply
:*Cable Guide - to handle wires in an XY-moving gantry
:*Spool holder - very important; to avoid filament tie-up
:*Wiring
 
==Later Phases==
*Belt width variation in Universal Axis. Includes double pulley for 6 mm belt.
*Motor size variation in Universal Axis
*Rod size variation
*Pulley sizes variation
*Development of Wiring Workbench in FreeCAD - to facilitate the drawing of wires and pipes
 
=Working Document=
 
<html><iframe src="https://docs.google.com/presentation/d/e/2PACX-1vTW5FUp7X9upLCZxSxO9S07lm5OsBDIE6gfIiq-54KE-ZyMMainGqvkqrYZF8ejvCe8EXvu6ZEyIk3U/embed?start=false&loop=false&delayms=3000" frameborder="0" width="480" height="299" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html>
 
[https://docs.google.com/presentation/d/1NE9fumppBmV2IpzdXkAeKqDEbFrFEKuNyIGo9nBRdeA/edit#slide=id.g25f630e9e5_6_74 edit]
 
=Links=
*[[FreeCAD_Workbench_Programming_101]]

Latest revision as of 21:52, 19 April 2020

Redirect to:

Retrieved from "https://wiki.opensourceecology.org/index.php?title=D3D_Workbench&oldid=217901"