CEB Press v17.08 Startup Checklist: Difference between revisions
Jump to navigation
Jump to search
(Created page with "=General Checkpoints For Setting Up the Machine= *Check the polarity of the power cables to the machine. *Set the machine up on level ground. Adjust the feet so all 4 feet tou...") |
No edit summary |
||
| Line 2: | Line 2: | ||
*Check the polarity of the power cables to the machine. | *Check the polarity of the power cables to the machine. | ||
*Set the machine up on level ground. Adjust the feet so all 4 feet touch the ground. | *Set the machine up on level ground. Adjust the feet so all 4 feet touch the ground. | ||
*Never run the machine without the safety rope - which is also the safety disconnect for power to the machine | *Never run the machine without the safety rope - which is also the safety disconnect for power to the machine | ||
=Checkpoints for Every Day of Operation= | =Checkpoints for Every Day of Operation= | ||
*Check for spilled hydraulic fluid | *Check for spilled hydraulic fluid - which indicates leaks | ||
*Check that hoses are in good condition | |||
*Check that no bolts are visibly loose | |||
Latest revision as of 06:45, 6 October 2017
General Checkpoints For Setting Up the Machine
- Check the polarity of the power cables to the machine.
- Set the machine up on level ground. Adjust the feet so all 4 feet touch the ground.
- Never run the machine without the safety rope - which is also the safety disconnect for power to the machine
Checkpoints for Every Day of Operation
- Check for spilled hydraulic fluid - which indicates leaks
- Check that hoses are in good condition
- Check that no bolts are visibly loose