PVC Pipe and Fittings Library: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
(remove parts which belong to OSE_piping_workbench)
 
(35 intermediate revisions by 3 users not shown)
Line 1: Line 1:
=Basics=
=Basics=


This is a library of all the current PVC Pipe and Fittings that have been made in freecad for OSE. Many fittings can be created using [[#OSE Piping Workbench]].
This is a library of all the current PVC Pipe and Fittings that have been made in freecad for OSE. Many fittings can be created using [[OSE Piping Workbench]].


= Pipe dimensions used in literature =
= Pipe dimensions used in literature =
Line 9: Line 9:
* Schedule - determines (indirectly) the thickness of the wall.
* Schedule - determines (indirectly) the thickness of the wall.


=Basic Parts=
*1.5" elbow -
*2" coupler - [[File:2inchcoupler.fcstd]]


= Cross =
=Parts Generated Using the OSE Piping Workbench + Other=


== Almost General Cross ==
<gallery perrow=6>
File:3elbow.png |'''3" PVC Elbow'''. Standard height of 4.75" as in [https://www.mcmaster.com/2389K29/]. - size:20kb - FreeCAD -[[File:3"-pvc-elbow.fcstd]],
 
File:toiletparts.png| '''Toilet Parts''' - Includes closet flange, 3" elbow with 2" heel, long 3" elbow - [[File:toiletparts.fcstd]]
 
File:rotatabletrap.png |'''1.5" rotatable trap''' -  FreeCAD -[[File:15rottrap.fcstd]]


A cross is described by dimensions G, G1, G2, G3, H, H1, H2, H3, M, M1, and pipe dimensions. As pipe dimensions we use POD, POD1, PID, and PID1.


[[File:cross-dimensions.png]]
File:2doublesanteetee.png |'''2" sanitary tee''' -  FreeCAD -[[File:2doublesantee.fcstd]]


=Genaerated Library Parts=
File:2doublefixtee.png |'''2" double fixture tee''' - Nibco site - [https://catalog.nibco.com/rfcconfirmation?name=all-categories&xcartid=27675] FreeCAD -[[File:2doublefixtee.fcstd]]


<gallery perrow=6>
 
File:3to15bushing.png |'''3" to 1.5" reducer bushing''' - FreeCAD -[[File:3to15bushing.fcstd]]
 
File:3wye.png |'''3" wye''' - size:80kb - FreeCAD -[[File:3wye.fcstd]]
 
File:345streetbend.png |'''3" 45 degree street elbow''' - size:80kb - FreeCAD -[[File:345streetbend.fcstd]]
 
File:1FKHDAF.png|'''1.5" 45 degree street elbow''' - size:80kb - FreeCAD -[[File:1545streetbend.fcstd]]
 
File:15elbow.png |'''1.5" elbow''' - size:30kb - FreeCAD -[[File:15elbow.fcstd]]
 
File:2tee.png |'''2 inch tee''' - size: 25k  - FreeCAD -[[File:2tee.fcstd]]
File:create-pipe-cad-screenshot.png |'''SCH40 1"  PVC pipe''' - size:5kb - FreeCAD -[[File:pipe-test.fcstd]],
File:create-pipe-cad-screenshot.png |'''SCH40 1"  PVC pipe''' - size:5kb - FreeCAD -[[File:pipe-test.fcstd]],
File:create-elbow-cad-screenshot.png |'''Elbow test file.''' Here alpha° is 45°. - size:21kb - FreeCAD -[[File:elbow-test.fcstd]],
File:create-elbow-cad-screenshot.png |'''Elbow test file.''' Here alpha° is 45°. - size:21kb - FreeCAD -[[File:elbow-test.fcstd]],
Line 31: Line 50:


=Library of STEP Downloads from McMaster Carr=
=Library of STEP Downloads from McMaster Carr=
Comparable in size to generated parts - except for some parts which are way too heavy.
Comparable in size to generated parts - except for some parts which are way too heavy.
<gallery perrow=6>
<gallery perrow=6>


File:elbow.png |'''1" PVC Elbow''' - size:19kb - FreeCAD -[[File:1"-pvc-elbow.fcstd]],
File:elbow.png |'''1" PVC Elbow''' - size:19kb - FreeCAD -[[File:1"-pvc-elbow.fcstd]],
Line 48: Line 69:
File:2"-elbow.jpg |'''2" PVC Elbow''' - size:157kb - FreeCAD -[[File:2"-elbow.fcstd]],
File:2"-elbow.jpg |'''2" PVC Elbow''' - size:157kb - FreeCAD -[[File:2"-elbow.fcstd]],


File:2"-tee.jpg |'''2" PVC Tee''' - size:8kb - STEP -[https://www.mcmaster.com/#2389k23/=1bcgk5c] - FreeCAD - [[File:2"-pvc-tee.fcstd]]
File:2"-tee.png |'''2" PVC Tee''' -157k - STEP -[https://www.mcmaster.com/#2389k23/=1bcgk5c] - FreeCAD - [[File:2"-pvc-tee.fcstd]]


File:2"-tee-short.jpg |'''2" PVC Tee - Short Nonstandard''' - size:4kb - STEP -[https://www.mcmaster.com/#4881k26/=1bcheo0] - FreeCAD - [[File:2"-pvc-tee-short.fcstd]]
File:2"-elbow-short.png |'''2" PVC Elbow - Short Nonstandard''' - size:4kb - STEP -[https://www.mcmaster.com/#4881k26/=1bcheo0] - FreeCAD - [[File:2"-pvc-tee-short.fcstd]] (file misnamed)


File:2"-3"-bushing.jpg |'''2"-3" bushing''' - size:161kb - STEP -[https://www.mcmaster.com/#2389k53/=1bchs2a] - FreeCAD - [[File:2"-3"-bushing.fcstd]]
File:2"-3"-bushing.jpg |'''2"-3" bushing''' - size:161kb - STEP -[https://www.mcmaster.com/#2389k53/=1bchs2a] - FreeCAD - [[File:2"-3"-bushing.fcstd]]
Line 60: Line 81:


</gallery>
</gallery>
= OSE Piping Workbench =
[[File:OsePipingWorkbenchIcon.svg]]
Implemented are:
* pipe
* coupling
* bushing
* elbow
* tee
* cross
* outer corner
[[File:OsePiningWorkbenchScreenshot.png|600px]]


= FAQ =
= FAQ =
Line 85: Line 86:
* Do we really want to 3D-print pipe fittings? Somehow I have doubt about mechanical properties of the 3D-printed products.
* Do we really want to 3D-print pipe fittings? Somehow I have doubt about mechanical properties of the 3D-printed products.
*: Yes.  For high pressure applications - 300 PSI - we would have to be very careful. For low pressure, such as 5 PSI, it's not a problem. Eventually, we want to refine printing techniques where our fittings can do what standard schedule 80 ABS fittings can do.
*: Yes.  For high pressure applications - 300 PSI - we would have to be very careful. For low pressure, such as 5 PSI, it's not a problem. Eventually, we want to refine printing techniques where our fittings can do what standard schedule 80 ABS fittings can do.
** Also with things such as part baking/anealing, composite filaments, and SLA or SLS Printers, very durable parts can be made
** Also with things such as part baking/[[FDM 3D Print Annealing | annealing]], composite filaments, and SLA or SLS Printers, very durable parts can be made.  Granted i agree proper testing, and potentially getting "Listed" or whatever the [[Building Code]] / [[Insurance]] stuff would need
 
 
=See Also=
 
*
 
 
=Useful Links=


*
[[Category: Materials]] [[Category: Plumbing]]

Latest revision as of 19:16, 25 August 2023

Basics

This is a library of all the current PVC Pipe and Fittings that have been made in freecad for OSE. Many fittings can be created using OSE Piping Workbench.

Pipe dimensions used in literature

  • O.D. - outer diameter.
  • Average I.D. - average inner diameter (why average?). This dimension determines the size of the pipe.
  • Min. Wall - thickness of the pipe wall.
  • Schedule - determines (indirectly) the thickness of the wall.

Basic Parts

Parts Generated Using the OSE Piping Workbench + Other

Library of STEP Downloads from McMaster Carr

Comparable in size to generated parts - except for some parts which are way too heavy.

FAQ

  • Do we really want to 3D-print pipe fittings? Somehow I have doubt about mechanical properties of the 3D-printed products.
    Yes. For high pressure applications - 300 PSI - we would have to be very careful. For low pressure, such as 5 PSI, it's not a problem. Eventually, we want to refine printing techniques where our fittings can do what standard schedule 80 ABS fittings can do.
    • Also with things such as part baking/ annealing, composite filaments, and SLA or SLS Printers, very durable parts can be made. Granted i agree proper testing, and potentially getting "Listed" or whatever the Building Code / Insurance stuff would need
Retrieved from "https://wiki.opensourceecology.org/index.php?title=PVC_Pipe_and_Fittings_Library&oldid=287611"