3D Printed 3D Printer: Difference between revisions
Jump to navigation
Jump to search
(Created page with "*Frame can be printed - xyz corners like Formufit *Pulleys, belts can be printed *Low performance (50 mm/s print rate) guide rods can be printed *Bronze bushings can be printe...") |
No edit summary |
||
| Line 15: | Line 15: | ||
*Rubber dip is made | *Rubber dip is made | ||
*Wire is drawn from scrap copper. | *Wire is drawn from scrap copper. | ||
=Examples= | |||
*https://reprap.org/wiki/Snappy_3 | |||
**https://github.com/revarbat/snappy-reprap | |||
Latest revision as of 20:53, 29 July 2018
- Frame can be printed - xyz corners like Formufit
- Pulleys, belts can be printed
- Low performance (50 mm/s print rate) guide rods can be printed
- Bronze bushings can be printed - using Metal embedded filaments
- Stepper motor is off-shelf, but can likewise be printed.
- Bearings for motor and idler are purchased
- Bearings for motor and idler are printed as bushings
- Print bed is metal, but can possibly be Printed bronze
- Electronics enclosure can be printed
- Unheated bed can be printed
- Power supply is cnc nilled
- Arduino Mega is milled
- LCD is bought
- Wire is drawn and plastic dipped using rubber dip
- Rubber dip is made
- Wire is drawn from scrap copper.