Latest revision as of 05:00, 17 July 2022

learning about gate drivers and estimated cost of power supply components to be around $70 for the flyback configuration, not including the microcontroller and display

Fri Sep 14, 2018

Learning about active snubbers, found an IC to control them

Wed Sep 12, 2018

Learning about lossless snubber circuits

Tue Sep 11, 2018

selected some parts for flyback configuration of power supply

found possible toroid powder core for flyback transformer

Sun Sep 9, 2018

selected a possible core for flyback transformer

Sat Sep 8, 2018

Learning about Flyback Transformer Design

Selected some possible parts for prototype

Wed Sep 5, 2018

learning about buck-boost converters, flyback transformer design, and component selection

Tue Sep 4, 2018

How to install Qucs-S

Sun Sep 2, 2018

Learned about buck-boost converters and new possibilities for flyback transformers enabled by advancements in MOSFET technology

Wed Aug 29, 2018

Learned about buck-boost power stages

Made to do/in progress list

Tue Aug 28, 2018

Talked with Jesse to brainstorm and plan next steps

Created Git repository for microcontroller code

Mon Aug 27, 2018

Learning about RecycleBot and PID controllers

Sat Aug 25, 2018

Made wiki page for Qucs

Quc-S Simulation: http://img.youtube.com/vi/SQkO3aYBCuk/default.jpg

Thu Aug 23, 2018

Adjustable Power Supply

Transformer, Rectifier

Tue Aug 21, 2018

Started BoM for Isolated Arduino Power Supply

Prototyped Non-isolated Arduino Power Supply, successfully produced 10V @ 380mA from 120Vac

Mon Aug 20, 2018

^edit^

Arduino Power Supply Simulation

Sat Aug 18, 2018

Calculations for Arduino Power Supply

Fri Aug 17, 2018

Arduino Power Supply

Thu Aug 16, 2018

BoM for Arduino power supply and voltage reference circuit

Wed Aug 15, 2018

Simulated non-isolated power supply for Arduino Mega

Tue Aug 14, 2018

Creating simulation of non-isolated power supply for Arduino Mega

R&D for power supply to Arduino: Universal_Power_Supply/Bill_of_Materials#BoM_for_20W_Power_Supply_.2Fw_12_DC_Output

Sun 12, 2018

Learning about OpenMP with Ngspice for multi-core circuit simulation

Updated Power Supply Simulation.

Learning how to enable multi-core processing to speed up simulation time.

Sat Aug 11, 2018

Installed Qucs-s (Qucs with Spice) to do transient analysis of circuits

Fri Aug 10, 2018

Learning Qucs to Simulate Power Supply

Wed Aug 8, 2018

Initial Design of 800W Power Supply

Tue Aug 7, 2018

Bill of Materials for 800W Power Supply

Fri Aug 3, 2018

Possible Parts for UPS

Wed Aug 1, 2018

Power Supply R&D

Tue Jul 31, 2018

Universal Power Supply (UPS) Block Diagram

Notes at Miles Work Meeting

Fri Jul 27, 2018

FreeCAD Test File

http://img.youtube.com/vi/kCk6uS-fRUY/default.jpg OSE Developer Test Video

How many hours each part of the test took to complete:

1) Installing Linux: ~3h. Tried to do a full install onto USB stick but display wouldn't work.

2) Learning FreeCAD: 4h

3) Documenting your work: 2h

Learning FreeCAD was the most difficult task.

Other feedback: A sample FreeCAD file with a competed cube would be helpful as a reference.

Score: 100% of test points completed.

Wed Jul 18, 2018

Video cover letter for OSE Development Team

Mon Jul 16, 2018

Video Cover Letter Prep

Installed OSE Linux on USB stick.

Sun Jul 15, 2018

Requested account but didn't receive confirmation email, communicated with Marcin to get it working. [1]

@@ Line 1: / Line 1: @@
-=Mon Jul 31, 2018=
+<html><iframe width="600" height="300" src="https://osedev.org/wiki/Miles?start=3/1/2018"></iframe></html>
+{{RightTOC}}
+=Sat Jul 16, 2022=
+Researched open source inverters:
+https://github.com/transistorgrab/OSSI
+https://github.com/SDI-SoftwareDefinedInverter/TAPAS
+=Wed Dec 26, 2018=
+Simplified [https://wiki.opensourceecology.org/wiki/Adjustable_Power_Supply_v18.08#Buck-Boost_Converter buck/boost converter design] and made [https://wiki.opensourceecology.org/wiki/Adjustable_Power_Supply_v18.08#Buck.2FBoost_Converter_Module bill of materials]
+=Sun Dec 16, 2018=
+[https://wiki.opensourceecology.org/wiki/Adjustable_Power_Supply_v18.08#General Learning about 555 Timers and PWM]
+=Mon Nov 19, 2018=
+Learning about PWM and [https://en.wikipedia.org/wiki/Multivibrator#Astable_multivibrator astable multivibrators]
+=Sun Nov 11, 2018=
+[https://wiki.opensourceecology.org/wiki/Adjustable_Power_Supply_v18.08#Buck-Boost_Converter Added control wiring to buck-boost converter draft design]
+[https://wiki.opensourceecology.org/wiki/Adjustable_Power_Supply_v18.08#Calculations Studying voltage follower circuits to increase input impedance of ADC]
+=Sun Nov 4, 2018=
+[https://wiki.opensourceecology.org/wiki/Adjustable_Power_Supply_v18.08#Buck-Boost_Converter Working on buck-boost converter draft design]
+=Fri Oct 26, 2018=
+[https://wiki.opensourceecology.org/wiki/Adjustable_Power_Supply_v18.08#Buck-Boost_Converter_2 component selection for buck-boost converter]
+=Mon Oct 1, 2018=
+[https://wiki.opensourceecology.org/wiki/Adjustable_Power_Supply_v18.08#Buck-Boost_Converter Started draft design of 1.5kW buck-boost converter]
+=Sun Sep 30, 2018=
+Found [http://kicad.rohrbacher.net/quicklib.php KiCad symbol generator] and made [https://wiki.opensourceecology.org/wiki/Adjustable_Power_Supply_v18.08#Conceptual_Design symbol for PWM controller]
+Learning how to implement [http://rohmfs.rohm.com/en/products/databook/datasheet/ic/power/switching_regulator/bd9850fvm-e.pdf PWM controller IC]
+[https://wiki.opensourceecology.org/wiki/Adjustable_Power_Supply_v18.08#Design_buck.2Fboost_converter_circuit.2Fmodule Brainstorming ways to increase PWM frequency]
+[https://wiki.opensourceecology.org/wiki/Adjustable_Power_Supply_v18.08#Calculations Doing calculations for buck-boost converter]
+=Wed Sep 26, 2018=
+[https://wiki.opensourceecology.org/wiki/Adjustable_Power_Supply_v18.08#Voltage_Conversion Researched buck-boost topologies]
+=Tue Sep 25, 2018=
+[https://wiki.opensourceecology.org/wiki/Adjustable_Power_Supply_v18.08#General Researched Isolation in Digital Power Supplies]
+=Mon Sep 24, 2018=
+Circuit diagram and cost estimate for [https://wiki.opensourceecology.org/wiki/Current_Meeting current meeting]
+Added possible parts to [https://wiki.opensourceecology.org/wiki/Adjustable_Power_Supply_v18.08#Forward_Configuration forward configuration]
+=Sun Sep 23, 2018=
+[https://wiki.opensourceecology.org/wiki/Adjustable_Power_Supply_v18.08#Figure_out_ways_to_salvage_or_build_transformers Reassessed flyback configuration] and [https://wiki.opensourceecology.org/wiki/Adjustable_Power_Supply_v18.08#Research organized research section]
+=Sat Sep 22, 2018=
+[http://www.ti.com/lit/ds/symlink/ucc28780.pdf learning about active flyback controller IC] and [https://wiki.opensourceecology.org/wiki/Adjustable_Power_Supply_v18.08#Flyback_Configuration_2 component selection]
+=Wed Sep 19, 2018=
+[http://www.ti.com/lit/ds/symlink/ucc28780.pdf learning how to use active clamp flyback controller IC]
+=Mon Sep 17, 2018=
+[https://wiki.opensourceecology.org/wiki/Adjustable_Power_Supply_v18.08#Research learning about gate drivers] and estimated cost of power supply components to be around $70 for the flyback configuration, not including the microcontroller and display
+=Fri Sep 14, 2018=
+Learning about active snubbers, [https://wiki.opensourceecology.org/wiki/Adjustable_Power_Supply_v18.08#Flyback_Configuration_2 found an IC to control them]
+=Wed Sep 12, 2018=
+[https://wiki.opensourceecology.org/wiki/Adjustable_Power_Supply_v18.08#Research Learning about lossless snubber circuits]
+=Tue Sep 11, 2018=
+[https://wiki.opensourceecology.org/wiki/Adjustable_Power_Supply_v18.08#Flyback_Configuration_2 selected some parts for flyback configuration of power supply]
+found possible toroid powder core for flyback transformer
+=Sun Sep 9, 2018=
+[https://wiki.opensourceecology.org/wiki/Adjustable_Power_Supply_v18.08#Flyback_Configuration selected a possible core for flyback transformer]
+=Sat Sep 8, 2018=
+[https://wiki.opensourceecology.org/wiki/Adjustable_Power_Supply_v18.08#Flyback_Transformer Learning about Flyback Transformer Design]
+[https://wiki.opensourceecology.org/wiki/Adjustable_Power_Supply_v18.08#Flyback_Configuration Selected some possible parts for prototype]
+=Wed Sep 5, 2018=
+learning about buck-boost converters, [https://wiki.opensourceecology.org/wiki/Adjustable_Power_Supply_v18.08#Research flyback transformer design], and [https://wiki.opensourceecology.org/wiki/Adjustable_Power_Supply_v18.08#Possible_Parts component selection]
+=Tue Sep 4, 2018=
+[https://wiki.opensourceecology.org/wiki/Qucs#Running_the_Above_Simulation:_More_Details How to install Qucs-S]
+=Sun Sep 2, 2018=
+[https://wiki.opensourceecology.org/wiki/Adjustable_Power_Supply_v18.08#Figure_out_ways_to_salvage_or_build_transformers Learned about buck-boost converters and new possibilities for flyback transformers enabled by advancements in MOSFET technology]
+=Wed Aug 29, 2018=
+[http://www.ti.com/lit/an/slva059a/slva059a.pdf Learned about buck-boost power stages]
+[https://wiki.opensourceecology.org/wiki/Adjustable_Power_Supply_v18.08#To_Do.2FIn_Progress Made to do/in progress list]
+=Tue Aug 28, 2018=
+Talked with Jesse to brainstorm and plan next steps
+[https://wiki.opensourceecology.org/wiki/Adjustable_Power_Supply_v18.08#Software Created Git repository for microcontroller code]
+=Mon Aug 27, 2018=
+Learning about [https://www.academia.edu/36721604/RepRapable_Recyclebot_Open_source_3-D_printable_extruder_for_converting_plastic_to_3-D_printing_filament RecycleBot] and [https://en.wikipedia.org/wiki/PID_controller PID controllers]
+=Sat Aug 25, 2018=
+[https://wiki.opensourceecology.org/wiki/Qucs Made wiki page for Qucs]
+Quc-S Simulation: {{YoutubePopup|SQkO3aYBCuk}}
+=Thu Aug 23, 2018=
+[https://wiki.opensourceecology.org/wiki/Adjustable_Power_Supply_v18.08 Adjustable Power Supply]
+[https://www.digikey.com/short/jfnv75 Transformer], [https://www.digikey.com/short/jfnvtc Rectifier]
+=Tue Aug 21, 2018=
+[https://wiki.opensourceecology.org/wiki/Arduino_Power_Supply_v18.08#Isolated Started BoM for Isolated Arduino Power Supply]
+[https://wiki.opensourceecology.org/wiki/Arduino_Power_Supply_v18.08#Prototyping Prototyped Non-isolated Arduino Power Supply, successfully produced 10V @ 380mA from 120Vac]
+=Mon Aug 20, 2018=
 <html><iframe src="https://docs.google.com/presentation/d/e/2PACX-1vTx4K6wvVdWwHGxGWjYOPPy4fUNDUj6HDOviTvzn8LSUzpZ5vf0IsRBg8UQxb4jbNPNayP32iX5rRdz/embed?start=false&loop=false&delayms=3000" frameborder="0" width="960" height="569" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html>
-[https://docs.google.com/presentation/d/1Y1zsd6oYwKa1JdSXy3bzswW5YfVC6J6c6HS8PW8RtUk/edit?usp=sharing edit]
+[https://docs.google.com/presentation/d/1Y1zsd6oYwKa1JdSXy3bzswW5YfVC6J6c6HS8PW8RtUk/edit?usp=sharing ^edit^]
+[https://wiki.opensourceecology.org/wiki/Arduino_Power_Supply_v18.08#QUCS-S_Simulation Arduino Power Supply Simulation]
+=Sat Aug 18, 2018=
+[https://wiki.opensourceecology.org/wiki/Arduino_Power_Supply_v18.08#Calculations Calculations for Arduino Power Supply]
+=Fri Aug 17, 2018=
+[https://wiki.opensourceecology.org/index.php?title=Arduino_Power_Supply_v18.08 Arduino Power Supply]
+=Thu Aug 16, 2018=
+[https://wiki.opensourceecology.org/wiki/Universal_Power_Supply/Bill_of_Materials#BoM_for_Non-isolated_9V_Power_Supply_.28280_mA.29 BoM for Arduino power supply and voltage reference circuit]
+=Wed Aug 15, 2018=
+[https://wiki.opensourceecology.org/wiki/Universal_Power_Supply/Research_Development#Qucs-s_Simulations Simulated non-isolated power supply for Arduino Mega]
+=Tue Aug 14, 2018=
+[https://wiki.opensourceecology.org/wiki/Universal_Power_Supply/Research_Development#Qucs-s_Simulations Creating simulation of non-isolated power supply for Arduino Mega]
+R&D for power supply to Arduino: [[Universal_Power_Supply/Bill_of_Materials#BoM_for_20W_Power_Supply_.2Fw_12_DC_Output]]
+=Sun 12, 2018=
+[http://ngspice.sourceforge.net/docs/ngspice-manual.pdf Learning about OpenMP with Ngspice for multi-core circuit simulation]
+Updated [https://drive.google.com/drive/folders/15Kk7HLIvO4MyOILj4dJSY45LwgANmcUd?usp=sharing Power Supply Simulation].
+Learning how to enable [https://sourceforge.net/p/ngspice/mailman/message/32611983/ multi-core processing to speed up simulation time].
+=Sat Aug 11, 2018=
+Installed [https://ra3xdh.github.io/ Qucs-s (Qucs with Spice)] to do transient analysis of circuits
+=Fri Aug 10, 2018=
+[https://drive.google.com/drive/folders/1jgUGcGJyVH43yN_hhrippUOOm9ozlwb5?usp=sharing Learning Qucs to Simulate Power Supply]
+=Wed Aug 8, 2018=
+[https://wiki.opensourceecology.org/wiki/Universal_Power_Supply/Research_Development#Initial_Design Initial Design of 800W Power Supply]
+=Tue Aug 7, 2018=
+[https://wiki.opensourceecology.org/wiki/Universal_Power_Supply/Bill_of_Materials#BoM_for_800W_Power_Supply_.2Fw_12-24V_DC_Output Bill of Materials for 800W Power Supply]
+=Fri Aug 3, 2018=
+[https://wiki.opensourceecology.org/wiki/Universal_Power_Supply/Research_Development#Possible_Parts Possible Parts for UPS]
+=Wed Aug 1, 2018=
+[https://wiki.opensourceecology.org/wiki/Universal_Power_Supply/Research_Development#Power_Supply_R.26D Power Supply R&D]
+=Tue Jul 31, 2018=
+[https://drive.google.com/file/d/14E6jdRYcacSnh8N1ed87tpt4PYiifUkv/view?usp=sharing Universal Power Supply (UPS) Block Diagram]
+Notes at [[Miles Work Meeting]]
 =Fri Jul 27, 2018=
@@ Line 33: / Line 201: @@
 =Sun Jul 15, 2018=
-Requested account but didn't receive confirmation email, communicated with [[Marcin]] to get it working.
+Requested account but didn't receive confirmation email, communicated with [[Marcin]] to get it working. [https://drive.google.com/file/d/1KmuKzSFBM1K2_-l8ISi56kYi1zcYRf6x/view?usp=drivesdk]

Miles Log: Difference between revisions

Latest revision as of 05:00, 17 July 2022

Sat Jul 16, 2022

Wed Dec 26, 2018

Sun Dec 16, 2018

Mon Nov 19, 2018

Sun Nov 11, 2018

Sun Nov 4, 2018

Fri Oct 26, 2018

Mon Oct 1, 2018

Sun Sep 30, 2018

Wed Sep 26, 2018

Tue Sep 25, 2018

Mon Sep 24, 2018

Sun Sep 23, 2018

Sat Sep 22, 2018

Wed Sep 19, 2018

Mon Sep 17, 2018