User:Dorkmo/Builds/CircularKnitic-Grande: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
(Created page with "Larger diameter version of User:Dorkmo/Builds/CircularKnitic, incorporating some design tweaks =BOM= ===Nuts and Bolts=== *p4 [https://www.fastenal.com/products/details...")
 
 
(2 intermediate revisions by the same user not shown)
Line 6: Line 6:


*p4 [https://www.fastenal.com/products/details/86257?r=~%7Ccategoryl1:%22600000%20Fasteners%22%7C~%20~%7Ccategoryl2:%22600039%20Sockets%22%7C~%20~%7Ccategoryl3:%22600042%20Flat%20Socket%20Cap%20Screws%22%7C~%20~%7Csattr02:%5EM2-0.4$%7C~%20~%7Csattr02:%5EM2.5-0.45$%7C~%20~%7Csattr02:%5EM3-0.5$%7C~%20~%7Cmanufacturer:%5EHOLO-KROME M3 x 16mm Flat Socket Cap Screw - Fastenal]
*p4 [https://www.fastenal.com/products/details/86257?r=~%7Ccategoryl1:%22600000%20Fasteners%22%7C~%20~%7Ccategoryl2:%22600039%20Sockets%22%7C~%20~%7Ccategoryl3:%22600042%20Flat%20Socket%20Cap%20Screws%22%7C~%20~%7Csattr02:%5EM2-0.4$%7C~%20~%7Csattr02:%5EM2.5-0.45$%7C~%20~%7Csattr02:%5EM3-0.5$%7C~%20~%7Cmanufacturer:%5EHOLO-KROME M3 x 16mm Flat Socket Cap Screw - Fastenal]
=Notes=
: Sculpteo max dimensions:
:* 940 × 590 mm - Acrylic
:* 940 × 480 mm - POM
:* 812 × 457 mm - Plywood
:* 940 × 590 mm - MDF
Need to examine kerf on thicker parts. Does this need to be accounted for in SCAD?
*https://www.sculpteo.com/en/lasercutting/laser-cutting-materials/mdf-material/
*https://www.sculpteo.com/en/lasercutting/laser-cutting-materials/acrylic-material/
*https://www.sculpteo.com/en/lasercutting/laser-cutting-materials/pom-material/
{| class="wikitable"
|+Kerf width (mm)
|-
|Thickness
|1
|2
|3
|5
|8
|10
|-
|Acrylic (black)
|0.07
| -
|0.105
|0.17
|0.20
|0.215
|-
|POM
| -
|0.065
|0.075
|0.075
| -
| -
|-
|MDF
| -
|0.2
|0.08
|0.145
|0.19
|0.205
|}

Latest revision as of 23:12, 16 July 2019

Larger diameter version of User:Dorkmo/Builds/CircularKnitic, incorporating some design tweaks

BOM

Nuts and Bolts

Notes

Sculpteo max dimensions:
  • 940 × 590 mm - Acrylic
  • 940 × 480 mm - POM
  • 812 × 457 mm - Plywood
  • 940 × 590 mm - MDF

Need to examine kerf on thicker parts. Does this need to be accounted for in SCAD?

Kerf width (mm)
Thickness 1 2 3 5 8 10
Acrylic (black) 0.07 - 0.105 0.17 0.20 0.215
POM - 0.065 0.075 0.075 - -
MDF - 0.2 0.08 0.145 0.19 0.205