Latest revision as of 10:12, 28 November 2019

Top Used

M42 - [1] - Ex: M42 P5 S255 (set digital pin 5 to on). Internet sez: For a non-PWM digital pin you need to put S0 (or any value <128) to turn off and S255 (or any value >=128) to turn on.
Which pins are available?
- D0 is the first most convenient at AUX ports - see Mega pins - [2]
- For 2 adjacent pins with ground - use GND - D63.
- Thus - to turn on a gas solenoid for the CNC Torch Table v19.10, use M42 P63 S255. To turn it off, set state to 0.
- D1 if use 5v gnd D1 as an adjacent triplet. This would be M42 P1 S255
M42 P57 S0

@@ Line 1: / Line 1: @@
-https://github.com/MarlinFirmware/Marlin/wiki/G-Code-in-Marlin
+See list at the Marlin site - http://marlinfw.org/meta/gcode/
+=Top Used=
+==IO Pin Activation==
+*M42 - [http://marlinfw.org/docs/gcode/M042.html] - Ex: M42 P5 S255 (set digital pin 5 to on). Internet sez: ''For a non-PWM digital pin you need to put S0 (or any value <128) to turn off and S255 (or any value >=128) to turn on.''
+*Which pins are available?
+**D0 is the first most convenient at AUX ports - see Mega pins - [https://wiki.opensourceecology.org/wiki/File:Megapins.png]
+**For 2 adjacent pins with ground - use GND - D63.
+**Thus - to turn on a gas solenoid for the [[CNC Torch Table v19.10]], use M42 P63 S255. To turn it off, set state to 0.
+**D1 if use 5v gnd D1 as an adjacent triplet. This would be M42 P1 S255
+*M42 P57 S0
 =Links=