CEB Press/Manufacturing Instructions/Grate mounts: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| (22 intermediate revisions by 5 users not shown) | |||
| Line 1: | Line 1: | ||
[[Image:grate-mounts.jpg|thumb| Grate mounts.]] | [[Image:grate-mounts.jpg|thumb| Grate mounts.]] | ||
== | <html><iframe src="http://sketchup.google.com/3dwarehouse/mini?mid=692395798fa885f71211da1f85706ccd&etyp=sw&width=400&height=300" frameborder="0" scrolling="no" marginheight="0" marginwidth="0" width="400" height="300"></iframe> | ||
</html> | |||
=Part Information= | |||
The grate mounts attach to the primary arms and to a nut welded to the grate. | |||
=Tools= | |||
*Torch | |||
*Punch with 13/16" Dies | |||
*Grinder | |||
= | =Materials= | ||
1 | *[2] Steel Angle 4" A x 4" B x 1/2" Thickness x 38" Length | ||
=Steps= | |||
*Punch a 13/16" hole at the bottom of the supports for each. | |||
[[Image:Gratehole.png|600px]] | |||
*Torch away a 4" section on the top of each grate to make it like the model shown. Remember that the two are mirrored. Cut away the corner so the hopper wont hit it, about a 1" 45 degree triangle. | |||
[[Image:Gratemount.png|600px]] | |||
*Torch a slot for a 3/4" bolt at the top of the mount, as shown. | |||
*Grind away all the slag. | |||
Latest revision as of 01:07, 23 December 2011
Part Information
The grate mounts attach to the primary arms and to a nut welded to the grate.
Tools
- Torch
- Punch with 13/16" Dies
- Grinder
Materials
- [2] Steel Angle 4" A x 4" B x 1/2" Thickness x 38" Length
Steps
- Punch a 13/16" hole at the bottom of the supports for each.
- Torch away a 4" section on the top of each grate to make it like the model shown. Remember that the two are mirrored. Cut away the corner so the hopper wont hit it, about a 1" 45 degree triangle.
- Torch a slot for a 3/4" bolt at the top of the mount, as shown.
- Grind away all the slag.