D3D v20.04 BOM Optimization: Difference between revisions
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
=3D Printed Universal Axis Pieces Simplification= | =3D Printed Universal Axis Pieces Simplification= | ||
This applies to [[Pro]], [[Pro 2]], and [[Pro 3]] | This applies to [[Pro]], [[Pro 2]], and [[Pro 3]]. | ||
<html><iframe src="https://docs.google.com/presentation/d/e/2PACX-1vRVNldLElDQ4NTypy1GdPkb0Tmhlqnd2biVQjC0BlQn8PIRB1u1tvPG-cm6rA4mfoszOEPQwfpOtPX-/embed?start=false&loop=false&delayms=3000" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html> | <html><iframe src="https://docs.google.com/presentation/d/e/2PACX-1vRVNldLElDQ4NTypy1GdPkb0Tmhlqnd2biVQjC0BlQn8PIRB1u1tvPG-cm6rA4mfoszOEPQwfpOtPX-/embed?start=false&loop=false&delayms=3000" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html> | ||
Latest revision as of 23:19, 28 July 2020
3D Printed Universal Axis Pieces Simplification
This applies to Pro, Pro 2, and Pro 3.
Wiring 1
. 7 cents for M-M dupont wire - [1]. 3 cents from Aliexpress - [2]
- Compare to ferruled Cat 5 22 ga wire - but that wire needs ferrules so labor is more.
- Need 2 for signal to SSR
- Questions - does wire work for 24V power supply?
Wiring 2
- 5V takeoff from Aux to feed into 5V for SSR. Instead of strip+ferrule of 2 wires, use M-F Dupont wire?
- 3 cents from Aliexpres as above