D3D Pro 3 v2b Data Collection: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 3: | Line 3: | ||
**Did not change anything, so I set it back to #define DEFAULT_MAX_FEEDRATE { 300, 300, 30, 25 } | **Did not change anything, so I set it back to #define DEFAULT_MAX_FEEDRATE { 300, 300, 30, 25 } | ||
*How about #define HOMING_FEEDRATE_Z (12*60) | *How about #define HOMING_FEEDRATE_Z (12*60) | ||
**Lowered multiplier from 12 to 6 | |||
**Shows visible improvement from 2 kg to 4 kg. Leaving the multiplier at 6. | |||
Latest revision as of 02:04, 16 March 2021
- Bed lift capacity: 1.5 kg only + 0.5 kg battery - 2 kg total, on z feedrate 30.
- Reduce feedrate to 15 - #define DEFAULT_MAX_FEEDRATE { 300, 300, 15, 25 }
- Did not change anything, so I set it back to #define DEFAULT_MAX_FEEDRATE { 300, 300, 30, 25 }
- How about #define HOMING_FEEDRATE_Z (12*60)
- Lowered multiplier from 12 to 6
- Shows visible improvement from 2 kg to 4 kg. Leaving the multiplier at 6.