Steel Ordering: Difference between revisions
Jump to navigation
Jump to search
| (16 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
*Norfolk Steel - 620.342.9202 - [https://www.norfolkiron.com/contact/] | *Norfolk Steel - 620.342.9202 - [https://www.norfolkiron.com/contact/]. Emporia delivery - by Sweiger. | ||
*AR500 Hardox - [https://www.ssab.com/products/steel-categories/wear-resistant-steels] | *AR500 Hardox - [https://www.ssab.com/products/steel-categories/wear-resistant-steels] | ||
*Sioux City Foundry - 2x delivery. Also good savings. Casting, stainless, steel, aluminum. Fraction higher on bar, flat, sheet. But stainless etc - this is better. | |||
*Doug is also doing bobcat work. | |||
=Typical Usage= | =Typical Usage= | ||
*2" shaft | |||
*3" shaft | |||
*1/4" angle - | *1" shaft, HR - 100'. Metalbythefoot is $3.27/ft. | ||
*2" shaft, HR - DNE | |||
*1" shaft, CR - Metalbythefoot 1045 CR is $4.7/ft. | |||
*2" shaft, CR - 40'. Metalbythefoot is $20/foot 1018CR. | |||
*3" shaft, CR - $45/ft. | |||
*1/4" x2" angle - $4.67 at MBF. | |||
*Rebar - 1/2". Menards is $6.45/ft. | |||
*1/4"x6" bar | |||
*1/8"x6" bar | |||
*1/16x6" strip | |||
*1/16x12" strip - DNE. Comes in sheet 3'x8' minimum | |||
*1/8x12" strip - yes | |||
*Round mechanical tubing 1" OD | |||
*Chromoly 1" OD 1/8 wall tubing is $9.4/ft at MBF. | |||
*1/8" wall DOM, 1" OD, is $5 at MBF. .19 wall 1" OD is $7/ft. | |||
*1" OD mechanical tubing, 0.095" wall, is $2.7/ft. | |||
=Links= | =Links= | ||
*[[Large Workshop Structure]] | *[[Large Workshop Structure]] | ||
Latest revision as of 20:15, 30 June 2021
- Norfolk Steel - 620.342.9202 - [1]. Emporia delivery - by Sweiger.
- AR500 Hardox - [2]
- Sioux City Foundry - 2x delivery. Also good savings. Casting, stainless, steel, aluminum. Fraction higher on bar, flat, sheet. But stainless etc - this is better.
- Doug is also doing bobcat work.
Typical Usage
- 1" shaft, HR - 100'. Metalbythefoot is $3.27/ft.
- 2" shaft, HR - DNE
- 1" shaft, CR - Metalbythefoot 1045 CR is $4.7/ft.
- 2" shaft, CR - 40'. Metalbythefoot is $20/foot 1018CR.
- 3" shaft, CR - $45/ft.
- 1/4" x2" angle - $4.67 at MBF.
- Rebar - 1/2". Menards is $6.45/ft.
- 1/4"x6" bar
- 1/8"x6" bar
- 1/16x6" strip
- 1/16x12" strip - DNE. Comes in sheet 3'x8' minimum
- 1/8x12" strip - yes
- Round mechanical tubing 1" OD
- Chromoly 1" OD 1/8 wall tubing is $9.4/ft at MBF.
- 1/8" wall DOM, 1" OD, is $5 at MBF. .19 wall 1" OD is $7/ft.
- 1" OD mechanical tubing, 0.095" wall, is $2.7/ft.