Carpentry 101: Difference between revisions
Jump to navigation
Jump to search
(Created page with "*Screw penetration depth. When you could sink 0.5". Thin part of siding vs thick - thin has less meat - don't do it. Countersink Max allowable depth. *Minimum screw penetratio...") |
No edit summary |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
*Screw penetration depth. When you could sink 0.5". Thin part of siding vs thick - thin has less meat - don't do it. Countersink Max allowable depth. | *Screw penetration depth. When you could sink 0.5". Thin part of siding vs thick - thin has less meat - don't do it. Countersink Max allowable depth. | ||
*Minimum screw penetration depth - half of wood thickness. | *Minimum screw penetration depth - half of wood thickness. | ||
*Straightening wood. | |||
*How to suck in screws or lag bolts. Oversize predrill. | |||
*Predrill vs not. | |||
*General rule for lag bolt predrill. | |||
*How to knock in post bases. Soften with water. Need to hold post somehow. Bang on metal, not wood - why? | |||
*Straightening wood - pipe clamps, c clamps, screws, bolts, by hand, screw clamp force. | |||
* Other than this - it's just cutoff and cordless circular and reciprocating saw. | |||
Latest revision as of 12:30, 23 December 2021
- Screw penetration depth. When you could sink 0.5". Thin part of siding vs thick - thin has less meat - don't do it. Countersink Max allowable depth.
- Minimum screw penetration depth - half of wood thickness.
- Straightening wood.
- How to suck in screws or lag bolts. Oversize predrill.
- Predrill vs not.
- General rule for lag bolt predrill.
- How to knock in post bases. Soften with water. Need to hold post somehow. Bang on metal, not wood - why?
- Straightening wood - pipe clamps, c clamps, screws, bolts, by hand, screw clamp force.
- Other than this - it's just cutoff and cordless circular and reciprocating saw.