Latest revision as of 00:22, 10 May 2023

Basics

A Simple 3D Print for Storing (Small) Cylindrical Batteries and Dispensing Them
Fed Via Gravity
This Page Aims Mainly to Show Various Existing Designs, and outline a potential ose (or just User: Eric] once they learn FreeCAD ...) version

A Thingiverse Design Titled "Battery dispenser AA and AAA remix"
- This may not be the exact one i have printed and used, but it is essentially it, gravity dispensed, 3D Printed Relief of what it holds, raised "tray" for ease of access etc
- This one also has holes for screw wall mounting it
A Printables Page by "BOTCAN3D" Titled "YET ANOTHER BATTERY DISPENSER FOR AA & AAA SIZES"
- This design is novel in that it uses something akin to a Geneva Drive to dispense one at a time via a crank
- This is not too necessary in regards to these manual "holder-dispenser" designs (Re K.I.S.S. ) , but would be HEAVILY of use for a Battery Dispenser

@@ Line 10: / Line 10: @@
 *[https://www.printables.com/model/276829-yet-another-battery-dispenser-for-aa-aaa-sizes A Printables Page by "BOTCAN3D" Titled "YET ANOTHER BATTERY DISPENSER FOR AA & AAA SIZES" ]
 **This design is novel in that it uses something akin to a [[Geneva Drive]] to dispense one at a time via a crank
-**This is not too necessary in regards to these manual "holder-dispenser" designs, but would be HEAVILY of use for an [[Automated Parts Vending Machine]]
+**This is not too necessary in regards to these manual "holder-dispenser" designs (Re [[K.I.S.S.]] ) ,  but would be HEAVILY of use for a [[Battery Dispenser]]
 =Internal Links=