Latest revision as of 04:31, 31 July 2025

Can last 50+ years in dry interior environment, but much less if wet or exposed. [1]
Up to 15 fires per second in bump mode. [2]
Practical controllable rate is 3-6 per second for long production runs. [3]
Freeman PWC50 uses 13 cfm for 100 staples per minute at 90 psi. [4]
Real world framing is 50 nails per minute in production. [5]. Needs 7.5 cfm per person. Limiting factor is?
- In the real world, about 10% of framing time is trigger time - with 90 percent divided by measuring, material handling, and positioning. By far it is setup in usual crews. [6]
- Solve time constraints by Measureless Design, 3D Printing and Robotics for handling, and Poka-Yoke for positioning - and you have Extreme Design-Build.

Sourcing

@@ Line 1: / Line 1: @@
+*Can last 50+ years in dry interior environment, but much less if wet or exposed. [https://chatgpt.com/share/687197d4-e548-8010-ae95-ea567fcf17ac]
 *Up to 15 fires per second in bump mode. [https://chatgpt.com/c/68719596-06d0-8010-b10b-b1b92096c6d6]
 *Practical controllable rate is 3-6 per second for long production runs. [https://chatgpt.com/share/687197d4-e548-8010-ae95-ea567fcf17ac]
@@ Line 5: / Line 6: @@
 **In the real world, about 10% of framing time is trigger time - with 90 percent divided by measuring, material handling, and positioning. By far it is setup in usual crews. [https://chatgpt.com/share/687197d4-e548-8010-ae95-ea567fcf17ac]
 **{{check}}Solve time constraints by [[Measureless Design]], [[3D Printing]] and [[Robotics]] for handling, and [[Poka-Yoke]] for positioning - and you have [[Extreme Design-Build]].
+=Sourcing=
+*Menards - $45 - [https://www.menards.com/main/hardware/fasteners-connectors/collated-nails-screws-staples/collated-staples/grip-fast-reg-16-gauge-1-crown-1-leg-electro-galvanized-wide-crown-staples-10-000-count/hpl2084228/p-1642874278008242-c-19719.htm]