Soil Pulverizer/Manufacturing Instructions: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
 
Line 1: Line 1:
{{GVCS Header}}
#REDIRECT [[Rototiller/Manufacturing Instructions]]
 
{{Template:Soil Pulverizer Manufacturing Instructions Navbox}}
 
=[[Rototiller/Manufacturing Instructions/Tools|Tools]]=
 
Note that CAM files are available for the various mounting plates of the soil pulverizer. See [[Soil Pulverizer CAM files – bearing mounts and motor mount plates]]
 
=Materials=
<html><iframe width='800' height='500' frameborder='0' src='
 
https://docs.google.com/spreadsheet/pub?hl=en_US&hl=en_US&key=0AlpsBarfpPkzdDFQd1ZMY21FS0NJdTJrekh4Rkltc1E&output=html
 
'></iframe>
</html>
 
*Edit [https://docs.google.com/spreadsheet/ccc?key=0AlpsBarfpPkzdDFQd1ZMY21FS0NJdTJrekh4Rkltc1E]
 
=Overview=
These pages provide instructions and information on manufacturing and assembling the Soil Pulverizer.
 
'''Note:''' All fabrication drawings are first draft and may contain errors. If you see any please add a note on the page for the correction.
 
=Fabrication Steps=
Complete all items in '''Parts Fabrication''' and then assemble them. Once the machine is assembled, you can paint it.
==Parts Fabrication==
The following steps can all be completed independently.
*[[Rototiller/Manufacturing Instructions/Bucket|Bucket]]
*[[Rototiller/Manufacturing Instructions/Pivot|Frame Pivot Hinge]]
*[[Rototiller/Manufacturing Instructions/Arm Rest|Arm Rest]]
*[[Rototiller/Manufacturing Instructions/Shaft and Motor Frame|Shaft and Motor Frame]]
*[[Rototiller/Manufacturing Instructions/Tines|Tines]]
*[[Rototiller/Manufacturing Instructions/Coupler|Coupler]]
*[[Rototiller/Manufacturing Instructions/Piece Parts|Additional Piece Parts]]
 
==Assembly==
[[Rototiller/Manufacturing Instructions/Assembly|Assembly]]
 
==Paint==
* Cover the hydraulics and any other place that should not be painted.
* Check all external surfaces for sharp edges and smooth with angle grinder.
* Remove any surface rust with wire brush and / or sandpaper.
* Apply a thorough coating of paint to all steel surfaces.
* Allow 24 hours to dry before handling.

Latest revision as of 05:37, 29 December 2011

Redirect to:

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Soil_Pulverizer/Manufacturing_Instructions&oldid=50313"