Revision as of 20:10, 11 July 2013

Quality Control

Download File:Cab and Loader Arms 12pm Jul 11.skp
Loader forearm stability
Force on arm lift cylinder mounting
- 9 degree cylinder angle means 9400 lbs lift force
Foot pedal detail
Valve 1 mounting plate detail
Valve 2 mounting plate detail
Foot pedal detail
- Pin tight with lever
Seat mounting
Wheel shaft procedure
Loader down pressure
Bolts clearing everywhere
Bolting feasibility everywhere
Build order correct for each moduleo
Bottom cylinder mounting spacer means can't bolt the tubes together as is

3 Spool, 25 gpm Motor Valve for Wheels, auxiliary implements, and turning - [1]. Needs Power Beyond Sleeve - [2]
25 GPM Joystick valve - [3]
[4] hoses - [4]
[2] hoses - [5]

25 GPM Joystick valve - [6]
45 GPM auxiliary motor valve - [7] - note: motor auxiliary goes before the joystick loader valve.
- Fittings - SAE 16 in,out,work - need 3 of [8] and 1 of [9]
25 GPM auxiliary motor valve - [10]

@@ Line 15: / Line 15: @@
 *Bolts clearing everywhere
 *Bolting feasibility everywhere
-*Build order correct for each module
+*Build order correct for each moduleo
-*Build order correct for complete assemblyC
+*Bottom cylinder mounting spacer means can't bolt the tubes together as is
-*QA plate spacing
-*Reverse the curling cylinders
-*Part count minimization - cylinder mount
-*Part count minimization - rear pivot connection
-*Part count minimization - front pivot connection
-*Loader cylinder fittings interference
-*Bucket cylinder fittings interference
-*Turning cylinder fittings interference
-*Stability of turning cylinder mounting
-*Arm pivot 8" piece is providing no support right now
 =Parts=